Honda Car Forum


Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Discussion > Honda Technical

LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 23 Nov 2009, 10:53 am
Junior Member
Join Date: Nov 2009
Posts: 1
Default 1991 Accord CV Joint Replacement

Hi all!

I'm replacing the CV on my son's 1991 Honda Accord. This is my plan. Am I on the right track here? I've done some of this and am stuck on step 7:
  1. Loosen the front wheel lug nuts
  2. Loosen Axel Nut.
  3. Raise Car.
  4. Drain the transmission oil.
  5. Raise the locking tab on the spindle nut and remove it with a 36 mm socket.
  6. Remove the damper fork bolt and damper pinch bolt. Remove the damper fork.
  7. Remove the knuckle-to-lower arm castle nut, and separate the lower arm from the knuckle.
  8. Pull the knuckle outward and remove the driveshaft outboard joint from the knuckle using a plastic hammer.
  9. Pry the driveshaft assembly with a screwdriver.
  10. Pull the inboard joint and remove the driveshaft and CV joint out of the differential case.
Okay, I've also tried some of this and am stuck on step 7. I have the pin pulled and the castle-nut off of the knuckle-to-lower-arm, however, I haven't been able to push the spindle back through. I've tried bearing pullers and a pickle-fork. Neither have worked. Have I removed enough to separate them? Is this enough?

Thanks for the help!
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Lower ball joint replacement for 94 Accord chrism2352 Honda Technical 0 02 Nov 2009 11:38 am
price for ball joint replacement adams Honda Technical 0 22 May 2008 10:37 pm
95 Accord ball joint replacement Nick Honda 3 1 14 Dec 2006 10:44 pm
Ball joint replacement David Honda 2 2 13 Oct 2003 04:56 pm

All times are GMT -5. The time now is 08:42 am.

Honda News | Autoblog
Powered by Yahoo Answers

Powered by vBulletin®
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc. is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse in any way. Copyright/trademark/sales mark infringements are not intended or implied.