Honda Car Forum

I bought lowering springs off Ebay for my EJ Civic coupe, and gave it a nice 1.5 inch drop. I'm going to be driving a 1990 DA Integra coupe, but i want to keep the lowering springs.... Are 92-95 civic coupe springs the same as 90-93 Integra springs?

The strut assembly should be able to bolt right in off your civic Ej to the Teg DA. Honda/Acura are compatible on most parts, anyway the Teg & Civ are like sisters, sharinga same type of character.































What ever you do keep attention to which springs are for the front/rear because they do have different specs as the weight is majority front heavy on a Front engine Front wheel driven vehicle= FF.































Some friends of mine did this without knowing till they took it off the jack stands/lift hoist and tried to drive around to break in the ride & new suspension settings. What happened was three guys helpin to quikly lower the car they put a Front spring on the front left, and the other front spring in the rear right... basically they crossed it without knowing so when they tried to drive it steered funny made noise bounced awkwardly and after returning to park it they get out noticinng the car now sitting crooked. pushed down on each of the four corners to Find out each corner absorded or bounced with very different stiffness, when i came after i asked them bout the front/rear springs and if they put them correctly.































Embarrasing, but they didn't know enough. hard lesson learned & corrected.