Honda Car Forum


Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Discussion > Honda Technical

LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 18 Aug 2009, 04:01 pm
Senior Member
Join Date: Aug 2007
Posts: 100
Default How do you install a K&N Cold Air Intake into a 1997 Honda Civic EX?

a video would help alot! Thanks
Reply With Quote
  #2 (permalink)  
Old 18 Aug 2009, 04:16 pm
Junior Member
Join Date: Sep 2007
Posts: 21

K&N website does not list your vehicle in its adaptation list. Apparently it is not supported. Give them a call.
Reply With Quote
  #3 (permalink)  
Old 18 Aug 2009, 04:31 pm
Junior Member
Join Date: Aug 2009
Posts: 1

There's a black box about 9" across on the left side of the engine compartment. This is the stock filter box, open the metal clips and remove the old filter and put your new one in place of the old one. Then, replace the clips.If you're talking about the whole intake, remove the intake tube from the throttle body, and pull out the stock filter box. Then put the new filter and tube in place of the old one. If it's a true cold air filter, then the filter should be down by the wheel well. Make sure you connect any vacuum lines and sensors your model might have.BTW Cold air intakes are bad for getting water in them, which can ruin your engine block for good. And always make sure your hood is properly latched when you're done tinkering in there.
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
how do you install an cold air intake on a 93 civic ex? claudia Honda Technical 6 03 Nov 2007 04:18 pm
Can someone recommend a cold air intake for an 07 Civic Si Sedan that is easy to install? scarroll625 Honda Technical 5 27 Oct 2007 01:45 pm
How to install a cold air intake on a 2007 honda civic? dsexto3 Honda Technical 5 17 Oct 2007 11:45 am
If I install a cold air intake on my 95 honda civic is there adjustment i have to do additionally? ???///??? Honda Technical 5 18 Sep 2007 10:26 am
How do you install a cold air intake on a 97 civic ex? Antonio Honda Technical 4 10 Sep 2007 06:32 am

All times are GMT -5. The time now is 01:28 pm.

Honda News | Autoblog
Powered by Yahoo Answers

Powered by vBulletin®
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc. is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse in any way. Copyright/trademark/sales mark infringements are not intended or implied.