Honda Car Forum |
|
|
|||||||
| Register | FAQ | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
| Honda Parts Search |
|
| ||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Well, appearently if you engine is "strong" enough, the turbo can blow it. However what are the internal parts to upgrade to allow it to achieve maximum performance?
|
|
|||
|
First, you want to have forged pistons, the lower the compression the better for maximum boost. In addition, your rods should be upgraded if possible. Most important things are your oil system and your fuel delivery. You need to have high capacity injectors and a reliable oil system for the turbo. Not a bad idea to upgrade cooling system either.
|
|
|||
|
see it depends that which kind of vehicle r u using.in bikes n cars you can use air filters like 'k&n' you can move to a good performance shop and buy an air filter. this costs 1500 - 2500 for bikes and 4000 - 6000 for cars. it increases the pick up as well as the average of the vehicle. secondly you can have a boosting exaust for bikes as well as cars. opening of an exaust increases the pick up(boost).and you can also use nitrous kits they are about 15000 for bikes and 30000 - 50000 for cars. this boosts the speed by increasing the rpm of a vehicle. but use nitrous in big gears otherwise your engine can be blowned. hope u liked my answer
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Is it true you can turbo an 08 civic si using an AJP turbo on stock internals? | Pierre C | Honda Technical | 7 | 08 Dec 2008 01:46 pm |
| Would it be better to turbo a B16A or a B18B, if Im already replacing internals and valvetrain.? | Herman B | Honda Technical | 4 | 08 Oct 2007 10:27 am |
| 1999 Honda Prelude. Are there any internals that have to be changed before adding a turbo more than | Livin life without a past. | Honda Technical | 4 | 06 Oct 2007 08:54 am |
| i got a b18 w/b16 internals very low compression w/ turbo my manifold gets very hot in neutral | manny_b1976 | Honda Technical | 3 | 12 Sep 2007 03:00 pm |
| i got a b18 w/b16 internals very low compression w/ turbo my manifold gets very hot in... | manny_b1976 | Honda Technical | 2 | 12 Sep 2007 03:00 pm |