Honda Car Forum


 

Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Discussion > Honda Technical

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 09 Mar 2009, 12:31 pm
Junior Member
 
Join Date: Aug 2008
Posts: 2
Default H22a4 to H22a1 injectors? Will it work?

I have a 99 prelude engine, but my injector clips are for OBD1 Hondas (96 and earlier). Could I use the injectors meant for the H22a1 ( VTEC of Course)? Or would I damage anything? Lost of power? What injectors should I use? should I convert the clips for Obd2?This engine is in a 96 Civic hatback with a p13 ECU(92-96 prelude Vtec).I do not have a resistor box wired in car. Would I need one to use H22a1 injectors?
Reply With Quote
  #2 (permalink)  
Old 09 Mar 2009, 12:46 pm
tim tim is offline
Senior Member
 
Join Date: Aug 2007
Posts: 119
Default

yes probaly
Reply With Quote
  #3 (permalink)  
Old 09 Mar 2009, 01:01 pm
Senior Member
 
Join Date: Oct 2007
Posts: 246
Default

You'd need to use a different ECU and wire in a resistor box for it to work. The '97+ injectors are Saturated injectors, and the '92-'96 H22A injectors are Peak & Hold. Basically that means that they run off of different voltage measurements. Some people have use the peak and hold injectors, in a set up that is for saturated injectors, but there are even more people who have tried and burned out their ECU's doing so.So honestly I would recommend either rewiring the clips back to OBD2, or staying with the OBD1 clips and buying some aftermarket saturated injectors; as long as you don't have a resistor box wired up. Keep in mind that most aftermarket injectors only work with OBD1 clips, so that might be another reason to stick with OBD1. Stock H22A4 injectors are 280cc by the way.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
darton sleeves h22a1? capone_italia Honda Technical 2 03 Jun 2008 12:21 pm
need info about boosting a h22a1 dohc v-tec..? kimandzach@att.net Honda Technical 3 10 Apr 2008 01:01 pm
can the computer in a 1992 acura legend cause fuel pump and injectors not to work? bluedasher27 Acura Technical 3 03 Mar 2008 05:16 am
will a h22a4 automatic engine wire harness work on a manual conversion? charles m Honda Technical 2 18 Oct 2007 04:51 pm
what are the flow rates of crx si fuel injectors compared to hf fuel injectors? Ian Honda Technical 1 25 Sep 2007 04:54 pm


All times are GMT -5. The time now is 05:50 am.


Attribution:
Honda News | Autoblog
Powered by Yahoo Answers




Powered by vBulletin®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
HondaCarForum.com is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse HondaCarForum.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.