Honda Car Forum

i have a 2000 civic with an automatic transmission. i plan on doing a engine swap with a manual transmission. What parts would i need after the swap. Thanks

this has been done many many times.. i don't know exactly whats involved, but if you head over to www.v6performance.net there are several articles describing parts involved, as well as costs, etc.. also you may want to try a google search as well..

Ok this is for the engine. You'll need the engine of course, manual transmission ECU, motor mounts, shift linkage, and you'll need to change your pedals since the automatic ones are bigger.The rest below is for the Manual TransmissionManual TransmissionShifterRelease BearingPressure plateClutchFlywheel from a M/T M/T Mounting plateFlywheel Bolts (M/T bolts are longer than a/t bolts)Clutch pedal Brake pedal (From M/T car)Clutch master cylinder w/ resevoirClutch slave cylinderClutch hydraulic lines (Main line, bleeder line, rubber line to slave cylinder) Reverse light sensor, Neutral position sensor, 5th gear sensor (on side of 5 speed)Lower shift boot & plateUpper Shift boot & Finisher plate.(Manual Transmission = M/T)

not worth it buy another 2000 civic.... unless your doing the work