Honda Car Forum


 

Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Discussion > Honda Technical

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 28 Jun 2008, 08:14 pm
Junior Member
 
Join Date: Jun 2008
Location: Southern New Hampshire
Posts: 3
Send a message via AIM to jkarov
Default installing hydrolyzer in a 1995 accord, looking for advice on the 02 sensor

hello friends,

I've got a bone stock 1995 accord LX, 98,000 on the clock.

I've got my HHO gas generator ( http://www.water4gas.com
installed. Just have to wire it up , and hit the safety switch which I'm
installing on the dash. That's my fail safe to make damn sure
it's not generating HHO if I forget to remove key and am just
listening to tunes

Doing some research on this, it does appear that it will set a CEL code
Here's the explanation I've come across.:

When the HHO gas hits the intake, the oxygen sensor reports a change in the exhaust gas makeup to the computer. The computer will correct the perceived problem by dumping in extra fuel. This state usually turns on your check engine light, sets fault codes and puts the computer in a state called open loop. In open loop the computer stops modifying the fuel ratios and reverts to a “safe” mode. Safe mode dumps extra fuel. This can reduce the mileage benefits dramatically.

My maint manual for that year accord says the o2 sensor should report
.01 - .02 volts until temp warms up to normal, then it should produce
readings from .01 - .09

I'm wondering if I could find an 02 "imitator", something that will
just put out a steady voltage to the ECU so it thinks all is well.

I have a friend with a modded Bonneville SSEI, and he had to do that
to keep the CEL from setting codes.

Given that this is OBD1, in new hampshire, it will pass inspection, even with
a code lite, but obviously it's gas mileage I'm after

Any feedback appreciated, especially if you know of a website
with o2 replacement stuff.

thanks
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how much to retard timing on a 1995 honda civic d16z6 when installing nitrous? soccerracer06 Honda Technical 5 13 Oct 2007 11:21 am
installing intake on civic .........o2 sensor? Air Force 1_s Honda Technical 8 18 Sep 2007 05:08 pm
where is the crank shaft sensor on a 1995 honda accord? tara_pavlicek Honda Technical 3 13 Sep 2007 05:40 pm
advice on installing timing belt and wate rpump Jeff Honda 2 6 12 Aug 2006 06:55 pm
1995 Civic EX 02 sensor replacement problems....... Nuclear Honda 2 1 03 Oct 2004 01:05 pm


All times are GMT -5. The time now is 01:14 pm.


Attribution:
Honda News | Autoblog
Powered by Yahoo Answers




Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
HondaCarForum.com is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse HondaCarForum.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.