Honda Car Forum | ![]() |
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
I have a 2005 and I assume the procedure is similar. Look up the diagram in your owners manual. If I had to do it again, I would put a bandaid or tape on my index finger cause pushing on the release spring hurts after a while. Basically you will feel the end of the spring which is in the shape of a circle. You will push on this away from you and toward the front of the car far enough that it releases and you can remove the bulb holder. Have a few swear words at the ready cause you'll need them. I'm sure the dealer has a tool that makes it real easy....Good Luck
|
|
|||
|
Thanks for your answer, when I tried to get the bulb out, the clip wouldn't release easily, so I was reluctant to pull it the wrong way, which is how is usually goes. Break it... then fix two things. I ended up using a mirror so I could see what to do. I saw a screw which holds the clip in place and almost tried to unscrew it. Then just pressed on the other side of the clip and it came loose. The other side (drivers side) looks alot tighter and will probably result in some scrapped knuckles. Thanks again for your reply.
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| frequent headlight bulb replacements | Bucky | Acura | 4 | 10 Mar 2006 07:44 pm |
| headlight clip | eglamkowski@angelfire.com | Honda 2 | 3 | 26 Sep 2005 06:13 pm |
| headlight clip | eglamkowski@angelfire.com | Honda 3 | 0 | 26 Sep 2005 09:24 am |
| WTB: Bulb for Integra JDM headlight | Frankencelery | Honda 3 | 1 | 13 Feb 2005 06:56 pm |
| Re: Clip removal tool? | Nobody | Honda 2 | 0 | 24 Jun 2003 09:48 pm |