Honda Car Forum

AmericanPatriot · #1 (**permalink**) 20 Oct 2007, 03:00 pm

seconds later.? Why the delay? Brake light switch seems to be functioning properly. The plunger goes in and out with no problems.

Drogba · #2 (**permalink**) 20 Oct 2007, 03:03 pm

malfunction somewhere, i'm betting something is looseyou're going to have to see a mechanic if you want a good answer

Chris H · #3 (**permalink**) 20 Oct 2007, 03:06 pm

In the wiring, there is a trigger at some point during your brake pedals motion towards the floor. The trigger may not be activated until half way pushed in. Or perhaps its faulty and just not registering properly. Its for you to decide. Try pushing it in slowly and seeing if it comes on at a certain point every time. If so, its ok. If not, you need to have it checked out.

Jake · #4 (**permalink**) 20 Oct 2007, 03:09 pm

There is probably a bad connection somewhere between the pedal and the lights. Check that and if that doesn't work, go to a mechanic

jnazareth02 · #5 (**permalink**) 20 Oct 2007, 03:12 pm

its the breaklight switch, the time you pressed the pedal its not still in contact until halfway. or its up to the setting before, all you have to do is just rotate the switch until to your desired height or setting. you can see the switch under the dashboard, of course! or above the pedal, of course you must lay down the carpet or the flooring. just rotate and see if you already got it right.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Brake Pedal still mushy after brake job	croweasley	Honda 3	49	31 Aug 2006 09:28 pm
Re: 92 Accord Soft? Brake Pedal	johnin	Honda 3	0	18 May 2006 12:08 pm
new 04 accord pulsing brake pedal	chuck smoko	Honda 3	9	10 Dec 2004 08:11 pm
94 Accord: Spongy Brake Pedal	Celtfire	Honda 2	5	05 May 2004 08:00 pm
Brake Pedal Sinking at the Traffic Lights	melbourne	Honda 3	15	28 Nov 2003 10:56 am

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)