Honda Car Forum

I swapped a D15B motor into my 94 civic. I have the ecu now i just need the intake manifold but i can't find any where that sells them. Would there be anything else that i need to buy to get the check engine light off?

Here ya go :http://got-jdm.com/9600-jdm-d15b-15l...dZViewItemThis also sounds like a good deal:http://sfbay.craigslist.org/eby/pts/370430062.html

D15B is a JDM 1.5L SOHC Vtec the intake manifold of the USDM D16Z6 will work since the motor is pretty much a D16Z6 head and D15Z1 bottom, junkyard

The only way to get the check engine light off is to do the swap correctly. If the engine was not obd1 then you are going to have problems. If it was obd1 then all you should have needed was the complete motor/tranny, the COMPLETE wiring harness from the D15, the ECU from the D15, and all the sensors from the D15. of course the axles, shift linkage, ETC... But if the engine wiring harness and ECU are from the same car, and everything is plugged up you should not get the check engine light, UNLESS like I said the motor is NOT obd1. The intake manifold WILL NOT make the engine light come on.

You need right engine swap..