Honda Car Forum

How do i program my keyless entry remote for my 1996 Honda Civic?

bring it to a local mecanic shop, they might be able to help

Programming the Transmitter 1. Turn the ignition switch to ON (II).2. Press and hold the Valet-Disarm button on the radio (between the AM/FM and CD/TAPE buttons) to enter the programming mode. (Continue to hold the button during this procedure, or programming will be cancelled.) Check that the power door locks cycle to confirm that you’re in the programming mode.3. Within 5 seconds, press the “Lock” or “Unlock” button on the transmitter. Check that the power door locks cycle to confirm that the code was accepted.4. Within 10 seconds, press the “Lock” or “Unlock” button on each of the remaining transmitters.5. After all the transmitters have been programmed, release the Valet-Disarm button to exit programming mode.

The easiest thing to do is go to a Honda dealer - they probably have a guy on staff who can show you in a flash. Or look in your book and the step by step will be there.