Honda Car Forum

famousbayon · #1 (**permalink**) 16 Oct 2007, 06:08 am

i have a 1992 hunda accard it is getting fire but it want crank whaty could be wrong.?

JT B ford man · #2 (**permalink**) 16 Oct 2007, 06:09 am

Check gas , Check air filter, Now check battery cables and then starter one of these things are bad, hope this helps

ted s · #3 (**permalink**) 16 Oct 2007, 06:10 am

i ask all customers this does it crank fast or normal ,and what u can do with the help of a freind is pull the number one spark plug wire off the one spark plug and stick a screw driver in the wire//////////// be careful not touch any metal and crank it there should be spark if none it is the distrib.or just cap and rotor ted

government curuption · #4 (**permalink**) 16 Oct 2007, 06:12 am

It could be a broken timing belt!

Boris859 · #5 (**permalink**) 16 Oct 2007, 06:16 am

if it doesn't crank how do you know its getting fire?,if you mean it do'nt start take off the oil cap and watch the cam,or put your finger on it (lightly),if the cam turns you're ok,if it don't broken timing belt,if it pass this test then check fuel flow,could be plugged filter,brken fuel pump,blown fuse or bad relay

eg_303 · #6 (**permalink**) 16 Oct 2007, 06:18 am

I think you mean it is cranking but not firing up fix your question and you'll get a answer as of fight now we're all lost.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
i have a 1992 hunda accard it is getting fire but it want crank whaty could be wrong.?	famousbayon	Honda Technical	0	16 Oct 2007 06:07 am
90 accord no fire i replaced module in dist.still no fire?	Bruce S	Honda Technical	6	06 Sep 2007 11:46 am
90 accord no fire i replaced module in dist.still no fire?	Bruce S	Honda Technical	4	06 Sep 2007 11:42 am
what is the easiest way to remove the crank pully bolt on a 1992 Acura Integra.?	rafalingus	Acura Technical	10	20 Aug 2007 05:44 pm
Crank & Crank Pulley Problems in 97 1.6EL	tada	Acura	0	16 Jun 2004 05:31 am

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)