Honda Car Forum


 

Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Discussion > Honda Technical

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 12 Oct 2007, 03:07 pm
Junior Member
 
Join Date: Aug 2007
Posts: 5
Default Will a JDM Integra Type R motor fit a 91 crx?

Just wanted to know if this swap is possible and if it is, can you tell me the expenses. If possible, can you also link me to another site that has a crx type r swap.
Reply With Quote
  #2 (permalink)  
Old 12 Oct 2007, 03:08 pm
Member
 
Join Date: Aug 2007
Posts: 56
Default

You're sure it's from a JDM car and not a stolen US ITR?
Reply With Quote
  #3 (permalink)  
Old 12 Oct 2007, 03:08 pm
Member
 
Join Date: Aug 2007
Posts: 56
Default

You're sure it's from a JDM car and not a stolen US ITR?
Reply With Quote
  #4 (permalink)  
Old 12 Oct 2007, 03:09 pm
Member
 
Join Date: Aug 2007
Posts: 57
Default

Yes, JDM type-R will fit.. But you'll have to get a different Trans, because the ITR trans is Hdyo, and your crx it's cable..The Mounts will be different, So you'll have to get a aftermarket mounts.. By the time you'll done with it.. It'll cost you about $7000.
Reply With Quote
  #5 (permalink)  
Old 12 Oct 2007, 03:21 pm
Senior Member
 
Join Date: Aug 2007
Posts: 594
Default

ya just slap that puppy right in
Reply With Quote
  #6 (permalink)  
Old 12 Oct 2007, 03:24 pm
Junior Member
 
Join Date: Aug 2007
Posts: 21
Default

yes it just goes right in, the tanny isnt going to be the problem go to hasport.com the have the mounts for cable and hydo trannys and everything having to do with that like axles, shift links, wire conversons, brackets and more. and for the motor look at tigerjapanese.com the type is is like arownd 4k already shipped but you should stay open minded like the h22 is going to make more power and better torque, also a b20 with a vtec head swap can put up some real good numbers. but either way you go good luck with that........
Reply With Quote
  #7 (permalink)  
Old 12 Oct 2007, 03:27 pm
Senior Member
 
Join Date: Aug 2007
Posts: 782
Default

Yes it fits, but the cost is not worth it. it has 190 HP crank and about 168 top the wheels and a LSD. a low mileage one runs about $5,000. You can get a GSR motor 170 HP 154 to the wheels NO LSD for about $1,700. add the LSD for $800, then Turbo it for $2,500 and spend $5,000 that way and have 250 HP to the front wheels.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
which is better a b16 type r or a b18 gsr for a motor? jessica1990ny Honda Technical 4 05 Oct 2007 04:48 pm
will the 3.2 tl type s motor fit in a 96 accord wagon ex?? ptycrack Honda Technical 2 06 Sep 2007 05:43 pm
B18C1 (gsr motor) vs. B18c5 (type r motor)? Jeffery W Acura Technical 6 03 Sep 2007 09:04 am
Whats faster a B-16 0r a type-s motor? OB Trice Honda Technical 5 21 Aug 2007 02:42 am
i have a OBD0 integra and just got a OBD1 integra motor, what all do i need to swap it? Eddie S Acura Technical 5 20 Aug 2007 08:00 am


All times are GMT -5. The time now is 07:16 am.


Attribution:
Honda News | Autoblog
Powered by Yahoo Answers




Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
HondaCarForum.com is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse HondaCarForum.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.