Honda Car Forum

I have the door panel off, the 2 screws holding the inner bracket are out and the screw holding the connector to the back of the lock is removed. The whole handle is loose. The handle seems to be held in by the lock itself but I can't figure out how to get it the rest of the way out. Anybody help?duff5569thanks for the answer.I have taken off a clip and the lever inside the door that the lock turns to unlock the car. Is there another one someplace else? Is there oneon the outside of the door? I 'll be darned if I can see anyrthing more inside the door that can be removed.Do I have to push really hard to fet the lock out? HERE IS A METAL C CLIP BEHIND THAT METAL PLATE UNDERNEATH THE LOCK CYLINDER YOU NEED A SMALL PICK TO PRY IT DOWN.ONCE THE CLIP IS OUT PUSH THE LOCK CYLINDER INTO THE DOOR.IT KIND OF HARK TO FIND AND IT MAY TAKE A WHILE. IVE BEEN DOING AUTO BODY FOR A WHILE AND I STILL DONT LIKE TAKING THOSE HANDLES OUT

whenever i dont know for sure how to remove a part i look it up in a chiltons manual.i did an oil pump that way and a head gasket niether one of which i knew how to do beforehand!!

THERE IS A METAL C CLIP BEHIND THAT METAL PLATE UNDERNEATH THE LOCK CYLINDER YOU NEED A SMALL PICK TO PRY IT DOWN.ONCE THE CLIP IS OUT PUSH THE LOCK CYLINDER INTO THE DOOR.IT KIND OF HARK TO FIND AND IT MAY TAKE A WHILE. IVE BEEN DOING AUTO BODY FOR A WHILE AND I STILL DONT LIKE TAKING THOSE HANDLES OUT