Honda Car Forum | |
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| Honda Parts Search |
|
| ||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
yes it does fit. you have to use the b18a tranny along with the other goodies like ECU and probably the wiring harness. the d16y is sohc vtec the b18 is dohc non vtec. the b18has more potential and power right of the back.
|
|
|||
|
yes it's very worth it.... more power and way more potential... and yes you gotta change the tranny... but what are you planning to do? drag? autocross?... i would check out www.honda-tech.com to get more answers to all of your questions, also find needed parts for the swap...
|
|
|||
|
Yes a motor swap is possible but it would be cheaper to put a turbo on your car. If your only looking to increase power to the low 200's a turbo kit would be fine if you want more than that you would need to swap motors and put a turbo on.
|
|
|||
|
yes, and go for it. the B18 engines are all from integras, which are the only hondas I have any problems with.. So if you want real hp numbers my boy has a B18 non vtec that puts down 300whp and 260tq with a turbo kit and open downpipe
|
|
|||
|
yes a b18a1 will fit in your car. yes you have to change the tranny. it is worth the change, but you should stay with something that is newer. like a k20, or an ls vtec b18. the horsepower gains are for the most part, similar, it just takes a little money. im not too sure what the horsepower stock on a d16y8 is, but a b18a1 is about 130. oh, and by the way, all b series engines/trannys, will all fit together and are interchangeable with parts.
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How can I tell what year my engine is?It is a B18A1 ( I believe anywhere from 90-93 from | Herman B | Acura Technical | 3 | 26 Aug 2007 04:28 am |
| b18a1 engine what turbo should i get? | gunitstunna1 | Acura Technical | 6 | 21 Aug 2007 02:48 pm |
| Can I replace my B18A1 with a D15B7 for my 1990 Integra? | shelleybabee | Acura Technical | 3 | 17 Aug 2007 03:05 am |
| Can I replace my B18A1 with a D15B7 for my 1990 Integra? | shelleybabee | Acura Technical | 2 | 17 Aug 2007 03:05 am |
| 92 integra motor b18a1 | katerbot | Acura | 3 | 17 May 2005 06:44 am |