Honda Car Forum

i think i got all the parts ...can some one help me thank you....

I have a 92 SI hatch and have done this conversion. it is a simple process. parts needed.both guts from both doors. regulators, door panels, switches, both door wiring harness, and all. here is the part u need that will make this easier. the wiring harness thats on the chasis on the driverside. pull the harness from that all the way in. there are about two plugs that go into the car. there will be about ten wires that go over to the other side. to the passenger side plug that plugs into the passenger side doors. thats about 5 feet of wiring you will need to run. just match color for color. the actaul harness is part of the chasis harness. you will also need a relay that plugs into the fuse box. very important. just trace the harness if you can. when i did mine i went to a salvage yard and just trace the wiring harness back ad got all the plugs and try to match that factory setting in my car. i hope that helps.haitech

That previous answer is 100% rightKC