Honda Car Forum

what is the max HP that i can get of a h22 with 11:5:1 compression with good mods and what kind of gas will i have to run the car on. This is what i have so far. First of all it is a h22a4 usdm with JE 11:5:1 pistons, H beam rods, ACL race main/rod bearing, JGE valve train, Ported head, OBX Stage two cams, cometic head gasket, Greddy full catback exhaust, DC headers, 400cc injestors with aem fuel rail and pressure regulator together with a high pressure fuel pump, spoon chipped p13 ecu, Ported intake manifold, OBX throtle body spacer. MSD ignition, IRIDIUM plugs and magnicore wires, engine oil cooler and alluminum radiotor. Hope this will help to tell me what hp i might be looking at the wheels. Thanks

600hp and still use it as a daily driver..... I'm not kidding

600hp NA? You must be kidding. Running exactly what you have, I bet with some good tuning you might be able to put down close to 250hp at the most. That should be a solid motor though, and you could lower the compression and boost it, and get quite a bit more. How exactly are you going to get 600hp with 400cc injectors? Hmm...