Honda Car Forum


 

Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Discussion > Honda Technical

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 07 Sep 2007, 07:00 am
Junior Member
 
Join Date: Sep 2007
Posts: 10
Default i need help with my h22a?

am building a h22a with 11:5 compression anyone knows what HP i might be looking at and wht octane it will be able to run on it without risks of detonating. also i need to know what are the best camshaft i should go with stage 2 or 3 and is it possible to turbo it and what will be a safe boost with that compression. your help will be appreciated. thanks
Reply With Quote
  #2 (permalink)  
Old 07 Sep 2007, 07:03 am
CJB CJB is offline
Member
 
Join Date: Aug 2007
Posts: 71
Default

You can get 600 hp with that motor using a T3 turbo with 19lbs of boost (MAX) but it has to be done right.
Reply With Quote
  #3 (permalink)  
Old 07 Sep 2007, 07:08 am
Senior Member
 
Join Date: Aug 2007
Posts: 139
Default

No, you do not...i repeat...do not want to run a turbocharger on your engine with such a high compression. If your going to run a turbo on your H22 you want the compression ratio to be somewhere around the area of 9 to 1. Even with the lower compression ratio it is not recommended that the boost be over 10lbs unless you have aftermarket internals that can withstand boost.As far a camshafts go...I have a pair of Stage 2 Comp Cams in my 2000 Civic Si...and they are amazing. But Skunk2 makes a good set of cams as well. Another option would be the JDM Prelude Type S cams. But then again if your planning on running a turbocharger you might want to look at a set of turbo cams.
Reply With Quote
  #4 (permalink)  
Old 07 Sep 2007, 07:10 am
SiR SiR is offline
Junior Member
 
Join Date: Sep 2007
Posts: 10
Default

Your looking to have no more engine tubocharging with a compression ration like that...my 00' Si has a stage 3 turbo and i am afraid of killing it...just be careful
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
looking to buy an h22a for 5th gen lude? whooliopreludee Honda Technical 2 03 Sep 2007 06:56 am
What all is involved in fitting an H22A in an 87 CRX? divided_by_infinity_69 Honda Technical 3 20 Aug 2007 06:10 pm
95 H22A Problem Ross Cranford Honda 2 1 08 Oct 2005 10:39 pm
95 H22A Problem Ross Cranford Honda 3 1 08 Oct 2005 10:39 pm
95 H22A Problem Ross Cranford Honda 2 0 30 Sep 2005 11:31 am


All times are GMT -5. The time now is 02:50 pm.


Attribution:
Honda News | Autoblog
Powered by Yahoo Answers




Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
HondaCarForum.com is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse HondaCarForum.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.