Honda Car Forum

Puller · #1 (**permalink**) 25 Aug 2007, 02:40 pm

-- bar that the hood rests on. I took apart the front end, bumper is okay, reebar is good was wondering if pulling the cross bar was something that can be done at home w/ simple tools? I have jacks and hammers. thanks.

Ryan · #2 (**permalink**) 25 Aug 2007, 02:44 pm

you can do this at home with a come-a-long crank. if you have a high lift jack a way can be found to use that as well. or, another way would be to chain it to something solid, start the car, put it in reverse and have a friend tell you when to stop.

ssanchez2002 · #3 (**permalink**) 25 Aug 2007, 02:46 pm

if you mean where the hood lock ? use a rope and a tree at one end the other end where is bend .But you might just replace it just unbolt or drill out the spot weld. go to a bone yard and get a use one.

walkerman5000 · #4 (**permalink**) 25 Aug 2007, 02:48 pm

Good answers so far. You can do it.

lyaser44 · #5 (**permalink**) 25 Aug 2007, 02:54 pm

I work at the virtual body shop These parts from us are relitivly inexpensive Call me there and I'll be glad to help you out 1 888 999 9827 Ask for Bill

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I can't open the front hood of my 1999 Acura 2.3 CL, what should I do?	gemadness	Acura Technical	5	20 Aug 2007 05:10 pm
I have a 89 honda prelude that has minor damage on the front. Should I fix it, or sell it?	tessam317	Honda Technical	7	20 Aug 2007 02:40 am
any one know what make and year of honda ,hood and front bumper fit a 1990 integra?	phil	Acura Technical	2	15 Aug 2007 07:09 pm
98 Accord - front ball joints are bad before original front brake pads?	Cris Fuhrman	Honda 3	5	22 Sep 2004 08:00 am
Integra GSR collision damage Q	Jim Yanik	Acura	0	02 Nov 2003 06:45 pm

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)