Honda Car Forum

How to install coilovers on a 1993 Honda Accord?

if your installing a full coilover set its not that hard if you know the basics of taking off you tire and getting the brakes and there components out of the way then really you just have to unbolt your old spring and shock assembly and take it out of the way and put the coilover set up in its place then put everything back together. just make sure when your unbolting it from under the hood you dont remove the center nut that holds the spring in place or the spring will go through your fender and can severly hurt you or your car or someone else. but if your only installing a set of coilover springs you will have to undo the center nut but without a spring compressing tool the knowledge and experience to do it i would suggest you take it to a proffessional and pay the few hundred it will cost to have it done right. well i hope i was some help and good luck.

coilovers on a honda.....no. if it sags, get new springs.