Honda Car Forum


Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Discussion > Honda Technical

LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 29 Dec 2012, 06:01 am
Junior Member
Join Date: Sep 2007
Posts: 20
Default throwout bearing noise or input shaft HONDA ACCORD F22B1?

ok so i got a new exedy clutch kit with everything so i installed the whole thing and what not and a few days later i get a silent chirp noise coming from somewhere where the clutch is a( NOTE the chirping wasnt there when the last clutch was in there. When i press the clutch just by resting my foot on it, the noise goes away and when i open the hood and move the fork or slave in any way, IE putting any sort of pressure on it engaging the clutch more or less in either direction the noise goes away and at times it doesn't sound at all. It doesnt matter what gear that im in it just matches the rpms on the motor even in neutral... i just hope its the throw out
Reply With Quote
  #2 (permalink)  
Old 29 Dec 2012, 06:33 am
Senior Member
Join Date: Oct 2012
Posts: 195

Put some grease on the fork and it will probably go away. With no pressure on the clutch, the fork will stay at a no pressure point on the throwout bearing. Imperfections in the bearing are scrubbing against the fork. A little high temp grease will solve this for you.
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Honda civic 1.6 Sport 05 with bad input shaft bearing.? Tom D Honda Technical 1 12 Aug 2012 08:17 pm
honda civic b16 rattling/bearing spining noise when driving????is it the wheel bearing or input carguy9061 Honda Technical 1 02 Jun 2010 11:46 pm
what is the part number for input shaft bearing on a 2002 acura rsx type s? gnccracer16 Acura Technical 1 10 Apr 2010 12:31 am
Who has replaced their honda input shaft bearing? d17a1civic Honda Technical 2 22 Oct 2009 10:42 pm
96 Prelude throwout bearing.? CRAAAAAACK Honda Technical 1 20 Aug 2009 08:46 pm

All times are GMT -5. The time now is 08:13 am.

Honda News | Autoblog
Powered by Yahoo Answers

Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc. is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse in any way. Copyright/trademark/sales mark infringements are not intended or implied.