Honda Car Forum


 

Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Discussion > Honda Technical

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 09 Dec 2012, 09:31 pm
Junior Member
 
Join Date: Aug 2007
Posts: 10
Default 1996 Honda Accord having issues with my clutch?

I just got a 1996 Honda Accord about 3 months ago. It was used but the paper work showed a lot of replacements including the clutch. First thing that happened was my throw out bearings went out got that fixed...then one day my clutch went straight to the floor I have my slave cylinder and my master cylinder replaced. When I got it out of the shop it didit have much pressure but everything worked fine and it felt better....This is my first manual....then some days it had pressure and it wouldnt engage until my pedal was almost completely at the top an other days not so much pressure an would engage closer to the floor...here recently it has a good bit of pressure engages closer to the top....If i push my pedal in I can hear something under the hood really good if my car is off an not as much with it on....I dont know what it could be and im trying to figure out before i spend a lot more money on something its not so please help!!!
Reply With Quote
  #2 (permalink)  
Old 09 Dec 2012, 09:46 pm
Junior Member
 
Join Date: Nov 2012
Posts: 5
Default

Im not quite sure if the 96 accord is using a hyrdraulic clutch. if its hydraulic then there might be some air in the system. You need to bleed the cluch to fill it with fluid.
Reply With Quote
  #3 (permalink)  
Old 09 Dec 2012, 10:03 pm
Senior Member
 
Join Date: Jun 2009
Posts: 151
Default

A broken motor mount explains it all.
Reply With Quote
  #4 (permalink)  
Old 09 Dec 2012, 10:18 pm
Senior Member
 
Join Date: Aug 2009
Posts: 400
Default

I don't think the shop bled the clutch hydraulics well. It isn't easy because the line between the cylinders is so steep but it has to be done. They should try it again... and you should not have to pay for it. It is just a few minutes of their time to get it right. I have not been able to fully bleed a Honda clutch without having a helper and doing the two man bleed in order to move fluid through it fast enough.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
about how much does it cost to get a burned out clutch repaired on a 1996 honda accord or Shawn Acura Technical 1 02 Jan 2011 09:16 pm
1996 Honda Accord Clutch Master And Slave Docfletcher Honda Technical 2 16 Apr 2009 08:01 pm
03 civic dx clutch issues djfanforlife88 Honda Technical 0 21 Jan 2009 04:06 pm
1996 Honda Accord~ Having a few issues ~THE ReDhEaD~ Honda Technical 0 01 Nov 2008 07:17 pm
1996 Accord - master clutch cylinder JackWagner Honda Technical 0 19 Dec 2007 08:28 am


All times are GMT -5. The time now is 04:33 am.


Attribution:
Honda News | Autoblog
Powered by Yahoo Answers




Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
HondaCarForum.com is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse HondaCarForum.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.