Honda Car Forum


 

Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Honda Car > Honda Odyssey

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 10 Sep 2008, 11:50 pm
Administrator
 
Join Date: Aug 2007
Posts: 109,634
Default 2005 Honda Odyssey Body

Sophisticated Styling with Advanced Compatibility Engineering Body Structure



Torrance, Calif. - Aug 31 —

Overview


While a casual observer may consider a vehicle's body as the exterior
styling and the metal pieces that create the overall shape, the importance of
the body goes much further. The body construction - mostly the construction
that can't be seen from the surface - is a primary contributor to
crash safety while providing the foundation for a vehicle's ride, handling
and NVH characteristics. To that end, the 2005 Odyssey's all-new body
and frame use Honda's most advanced technology to introduce a new era
of safety and performance potential to the minivan segment in regards to collision
safety, collision energy management, increased rigidity and comfort.


What's new for 2005



  • Advanced Compatibility Engineering (ACE) Body Structure

  • Width increased by 1-inch

  • Static and dynamic rigidity increased 20 percent

  • Aerodynamic coefficient of drag reduced by about 5 percent

  • Moonroof

  • Optimized high tensile strength metals for relative body weight reduction

  • Fuel tank capacity increases to 21.0 gallons (+1.0 gallon)

  • Fit and finish increased/body panel gaps reduced

  • Power Tailgate available

  • Enhanced Power Sliding Door operation

  • 2nd Row Power Windows


The Odyssey's body is designed to provide a low floor with a large cabin
for the ultimate in minivan functionality. The Odyssey is large and roomy inside,
yet can fit in the average garage. Structurally, the body is designed to function
as a strong, stable partner for the Odyssey's 4-wheel independent suspension
system and V-6 powertrain.


Odyssey Exterior Dimensions Versus the Competition



































































. 2005 Honda Odyssey 2004 Honda Odyssey 2004 Toyota Sienna 2005 Chrysler Town & Country 2004 Nissan Quest
Length
201.0
201.2
200.0
189.1
204.1
Width
77.1
75.6
77.4
78.6
77.6
Height
68.8 (LX)
68.5
68.9
68.8
70.0
Weight (base model)
4,378
4,310
4,120
3,988
4012
Power Sliding Doors
Available
Available
Available
Available
Available
Power Tailgate
Available
Not Available
Available
Available
Available
Moonroof
Available
Not Available
Available
Available
Available

Note: All specifications subject to change.


Exterior Styling


Reflective of the Odyssey moving to an even higher level of first-class refinement,
the exterior styling of the 2005 Odyssey delivers an appearance of sophistication
designed to complement the high technology and luxury of the interior and powertrain.
The Odyssey's re-designed sheetmetal exhibits a sophisticated styling
direction that combines solid and massive accents starting at the front fenders
to create an indented beltline around the vehicle. The lines establish a powerful
stance and an enveloping feeling of safety.


The ultimate goal of the styling was to wrap the functional aspect of the Odyssey
in a shape that is prestigious, advanced and powerful. In other words, the styling
says this is a sporty and luxurious vehicle first, a minivan second.


Advanced Compatibility Engineering (ACE) Body Structure


The Odyssey is the first North American application of Honda's newly
developed Advanced Compatibility Engineering (ACE) body structure, a system
that results in improved compatibility between vehicles of different sizes with
significantly enhanced occupant protection and reduced aggressivity toward other
vehicles in a collision. This body structure employs an innovative new front-end
frame structure that reduces the potential concentrated force of an impact by
dispersing and absorbing crash energy over a larger area. The design also helps
reduce the potential for misalignment with the frame of the opposing vehicle
whether it's small or large. The Odyssey is the perfect platform for Honda
to launch its Safety for Everyone commitments (see Overview) as the previous
model already earns the National Highway Traffic Safety Administration's
(NHTSA) highest ratings of five stars for frontal and side impact crash tests.
Honda's internal testing shows that 2005 Odyssey is expected to achieve
or exceed the same results.


The Odyssey's ACE body structure is configured for high energy absorption.
In the event of a frontal collision, the body structure with its front-mounted
polygonal main frame is designed to prevent structural penetration while distributing
forces evenly through multiple major load bearing pathways - and away
from the passenger compartment. For comparison, a conventional body structure
generally concentrates the loads from a collision through two pathways running
longitudinally through the lower portion of the frame. In the ACE body structure
for example, frontal impact force can be distributed from the front of the vehicle
through the side sill, floor frame and A pillar in order to reduce the cabin
deformation. Special gussets are used to help direct forces throughout the frame.


The bottom line is that the ACE body structure enhances the maximum potential
for energy absorption during a collision because impact forces can be distributed
through more vehicle mass and away from the passenger compartment.


Four Ring Shell


The Odyssey's body is further reinforced by a four-ring safety cage.
Consisting of a series of hoops formed by the underfloor crossmembers, the A,
B, C and D pillars, and crossmembers in the ceiling, the four ring shell encircles
the passenger compartment and provides protection in the event of a side impact
or rollover.


Further reinforcement against side impacts are provided by the A, B, C and
D Pillars. These pillars feature internal plates and gussets that greatly strengthen
them against buckling. To better protect the Odyssey against rear impact, the
main-frame members extend all the way to the rear of the body and are tied together
with a crossmember under the floor. In addition, the rear pillar is internally
reinforced and large outrigger pieces further tie the base of the rear pillar
to the floor.


Pedestrian Safety


Honda's commitment to safety extends to pedestrians as well as vehicle
occupants. To help reduce pedestrian injuries in the event of a collision, the
Odyssey's hood and fender areas were designed to deform if contacted by
the head of an adult or child pedestrian. Energy-absorbing collapsible hood
supports, wiper arms and fender mounts allow substantial deformation in an impact,
allowing the engineering team to meet its target for pedestrian safety.


Front Driver's and Passenger's Doors Construction


The Odyssey's front doors use triple-stage stopper construction for ease
of ingress/egress in tight parking situations. The doors use a special construction
that provides a solid feel and sound when closing. The doors feature side impact
protection beams.


Dual Sliding Doors with Power Windows and Available Integrated Sunshades


New for 2005, the Odyssey is equipped with power windows in the second row
dual sliding doors. The windows feature auto up and down functions. The second
row window switches use the recessed push down/pull up design that further helps
to reduce the risk of the window pinching an occupant.


Honda Odyssey EX, EX with Leather and Touring models are equipped with dual
power sliding doors. The doors can be opened from the outside, when the handle
is pulled, or by the master switch on the instrument panel. A lockout switch,
on the instrument panel, can disable the door's automatic operation. The
doors can also be independently operated with the keyless entry system. This
allows the doors to be opened or closed from a distance of up to 30 feet.


Significant safety features have been built into the Odyssey's power
door system. If the door should encounter any resistance while closing, it will
immediately reverse direction. New for 2005, a direct detection system uses
sensors built into the rubber seal on the leading edge of the door that detects
when an object is in the path of the door. The sensors use three closely spaced
wires inside the doors' rubber seal that can touch if contact is made
to the outer edge of the seal. When the wires touch, that sends a signal to
the doors operating system to reverse direction. The system is extremely sensitive
and relatively gentle (reduced load for pinch detection).


Additional enhancements to the power door system include a clutch system for
reduced load requirements during manual operation. Also, the doors will not
completely retract to the fully open position if the rear windows are down.
This is a safety feature to prevent a person's head or other body part
(sticking out the window) from getting pinched between the front of sliding
door and the door frame during automatic open operation.


Integrated sunshades are standard on EX and above models. The retractable shades
are integrated into the lower portion of the doorsills and can be easily pulled
up and secured via a hook at the top edge of the window sash. The shades cover
the vast majority of the glass and do not interfere with power window operation.


As a safety feature, the dual sliding doors on all models each have side impact
protection beam.


Power Tailgate


Odyssey Touring models feature a power rear tailgate that can be conveniently
controlled from four sources: the key fob, the exterior handle (for manual opening),
a switch mounted on the underside of the tailgate (for closing), and from a
switch on the instrument panel. The tailgate can be manually closed at any time
during open or close operation. As a safety feature, the tailgate has an auto
detection system (similar to the power sliding door direct detection system)
that will reverse direction in the event that something prevents it from closing
or opening.


Refined Fit and Finish


Attention to detail is one trait that helps set the Odyssey apart from the
competition. Fit and finish details have been tightened for 2005 with improvements
to gaps between body panels and exterior features. The end result is a refined,
tight appearance that speaks to the overall quality of the vehicle with the
smallest gaps between body panels in the minivan segment.


Body Panel Fit Improvements




























Area 2005 Odyssey Fit (mm) 2004 Odyssey Fit (mm)
Hood and Bumper 4.0 5.0
Headlight and Fender 1.0 2.0
Fender and Bumper 0.5 2.0
Taillights and Tailgate 1.0 2.0

Aerodynamics


The 2005 Odyssey manages airflow for an approximate 5 percent gain in coefficient
of drag (Cd). Items such as the A pillar, side mirror, wiper layout and the
use of underfloor pans have all been designed to minimize air turbulence. These
designs result in enhanced fuel economy and less wind noise. Other measures
contributing to reduce wind noise levels include dramatically reducing the width
of body seams, mounting glass flush with the surrounding body panels, and using
double seals around all doors.


NVH Countermeasures


The redesigned Odyssey utilizes a wide variety of technology, construction
and space age materials to reduce road noise to the lowest levels available
in the minivan segment. The Odyssey has the following features that address
NVH:



  • Floating front and rear subframes with rubber bushings (new on rear subframe)

  • Advanced sound absorbing material lines majority of cabin (new material
    technology)

  • Active Noise Control (exclusive to EX with Leather and Touring models)


To maximize gains derived from the Odyssey's stronger body, both the
front and rear subframes of the new Odyssey have structural enhancements to
improve ride and handling precision characteristics along with noise reductions.
The points where the front and rear subframes attach to the body have rubber
bushings, which help to isolate the effects of noise transmitted from road surfaces
and bumps through the fully independent suspension.


Lightweight Soundproofing Material


The Honda Odyssey utilizes a new style of lightweight sound proofing material
that reduces weight and absorbs more noise than traditional insulation. Traditional
soundproofing material works by "insulating" the cabin from noise
with a thick, heavy layer of foam padding (like carpet padding) on top of a
layer of rubber meltsheet (and then adding an additional thin layer of meltsheet).
The 2005 Odyssey still uses meltsheet, but the new soundproofing material is
comprised of a much thinner layer of lightweight sound absorbing substrate that
"absorbs" sound rather than "insulates" or "reflects"
it. This new material can save more than 30 pounds of weight compared traditional
soundproofing material while providing higher sound deadening performance. (See
the next page for a detailed illustration of soundproofing technology.)


Active Noise Control (ANC)


Additional sound reduction is achieved through the Active Noise Control (ANC)
system (on models with Variable Cylinder Management). See the Interior section
for more detail on ANC.


Fuel System


The 21-gallon, saddle-shaped fuel tank is molded of high-density polyethylene
for low weight, freedom from corrosion and impact resistance. It is positioned
immediately ahead of the rear wheels to help guard against collision damage.
Corners of the tank are rounded and the inside of the tank is baffled to diminish
the likelihood of sloshing-fuel noise. The polyethylene filler pipe and fuel
lines are light, not susceptible to corrosion and resistant to fuel vapor losses.
A high-efficiency fuel pump is housed inside the fuel tank. The fuel-filter
is a lifetime design that never needs replacement.


The Odyssey complies with all evaporative emissions, on-board diagnostics,
and refueling vapor recovery requirements. The fuel vapor canister and filter
are rubber mounted for noise isolation and protected against rock and debris
damage by a deflection shield. The capacity of the tank has increased by 1-gallon
for 2005.


Exterior Lighting


The Odyssey headlamp design uses aggressive looking dual projector beam-style
halogen lamps for front-of-vehicle illumination. The lamp assemblies feature
a clear outer lens that wraps around the vehicle's front corners and the
running lamps and turn signals are housed inside. The round inboard lamps are
for high-beam illumination and the round outboard lamps are for normal driving.


The halogen headlights offer class-leading performance, casting a beam wider
and further than any other minivan currently on the market. Odyssey EX and above
models feature an auto off . Odyssey Touring models provide a user-configurable
option for auto off for the headlights, configurable through the Multi Information
Display. In addition to auto off, the Touring model headlights also turn on
automatically by using a sensor. Fog lamps are standard on Touring models and
accessories on all other trim levels. The rear taillights feature a reflective
inner-cube design as the background for the four lights and a reflector. The
lenses are solid red brake and running lights, amber for turn signals. A large,
rectangular back-up-lamp reflector provides extra illumination when backing
up.

Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Does any body know when do the 2008 honda odyssey and chev tahoe comes out? Aurora O Honda Technical 1 12 Oct 2007 04:45 pm
Body Kit for a 2005 Honda CRV? Chez Honda Technical 5 13 Sep 2007 04:08 am
2005 honda civic body kits? sbrewer626 Honda Technical 3 12 Sep 2007 05:18 pm
on the 2005 HONDA ODYSSEY the horsepower is 255 but in the 2006 ODYSSEY the horsepower is 244. Zeeshan Honda Technical 6 26 Aug 2007 01:36 pm
Q. Throttle Body Spacer for 2005 Accord 4 cyl. George C. Honda 2 1 24 Oct 2006 06:08 pm


All times are GMT -5. The time now is 12:55 am.


Attribution:
Honda News | Autoblog
Powered by Yahoo Answers




Powered by vBulletin®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
HondaCarForum.com is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse HondaCarForum.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.