Honda Car Forum |
|
|
|||||||
| Register | FAQ | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
| Honda Parts Search |
|
| ||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Okay, I have a friend that has an 87 Integra LS and he cant pass smog. The
tech told him the timing was off and that was why... He doesn't have any manuals for it and I cant find the timing marks. Does anyone have this info or know where I can find it? Greatly appreciate any help, didn't find any strictly Acura forums, so sorry if this is a bit off topic. |
|
|||
|
"don't shoot the messanger" <brandonaudet@verzion.net> wrote in
news:RmxAl.845$Q52.826@nwrddc02.gnilink.net: > Okay, I have a friend that has an 87 Integra LS and he cant pass > smog. The tech told him the timing was off and that was why... He > doesn't have any manuals for it and I cant find the timing marks. > Does anyone have this info or know where I can find it? Greatly > appreciate any help, didn't find any strictly Acura forums, so sorry > if this is a bit off topic. > > > Crank pulley has two sets of marks filed into its edge. Set 1: One mark on its own. That's TDC for the #1 cylinder. Set 2: A group of three, located forward of the single one. The middle one in that group of three is the specified timing mark. You may have to search for some time in order to tell the marks from all the rust. Put a dab of Wite Out on the mark so it's easier to find with the strobe. The plastic timing cover has a tendency to warp over time, so the mark that's on the inner surface of the pulley gets covered, and you need to use the mark that is on the outer edge. Prior to setting the timing, you need to use a paper clip to short the gray Service Check connector that's behind the top of the passenger kick panel. This action prevents the ECU from attempting to monkey with the timing while you adjust its base setting. And if you need to turn the engine by hand, use a 19mm socket on the crank pulley (pull the rubber plug in the fender splash shield), and only ever turn your ratchet COUNTER-clockwise! Do NOT use the starter to "bump" the engine over. -- Tegger The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
|
|||
|
<brandonau...@verzion.net> wrote:
> Okay, I have a friend that has an 87 Integra LS and he cant pass smog. The > tech told him the timing was off and that was why... He doesn't have any > manuals for it and I cant find the timing marks. Does anyone have this info > or know where I can find it? Greatly appreciate any help, didn't find any > strictly Acura forums, so sorry if this is a bit off topic. autozone.com has a free online manual specific to this Acura with the steps for setting the timing that should back up or add to what Tegger posted. But be aware that getting older cars to pass emissions can be a nightmare. I see more abandoned threads on this topic at honda- tech.com. You are on-topic; acura = honda. |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 91 integra timing belt? | Jimmy F | Acura Technical | 5 | 03 Sep 2007 07:44 am |
| 94 Integra Timing Belt | BigBadBob | Acura | 2 | 29 Oct 2004 03:07 pm |
| 99 Integra Timing Belt | tony thomas | Acura | 1 | 15 Oct 2004 07:05 pm |
| 98 integra timing belt | Andy H | Acura | 5 | 12 Aug 2003 10:09 pm |
| Integra timing belt | CZ | Acura | 3 | 11 Jul 2003 08:57 pm |