Honda Car Forum

To review:

The front O2 sensor went out. A multi-fit sensor that was listed for my car
didn't work. A Bosch sensor new from Advance Auto Parts didn't work

I bought a new one (Densco) from Honda this morning, $200.00 and change with
tax. So far no CEL and no codes, either hard or pending.

Maybe it's true that the F23A4 will only accept the Densco. Time will tell.

--
Pull my chain to reply.

Nasty wrote:
> To review:
>
> The front O2 sensor went out. A multi-fit sensor that was listed for my car
> didn't work. A Bosch sensor new from Advance Auto Parts didn't work
>
> I bought a new one (Densco) from Honda this morning, $200.00 and change with
> tax. So far no CEL and no codes, either hard or pending.
>
> Maybe it's true that the F23A4 will only accept the Densco. Time will tell.
>
> --
> Pull my chain to reply.

You can buy Denso O2 sensors from a number of auto parts "stores" on
the web for about half what the dealer charged you. I've purchased them
for my Acura and Toyota vehicles with the exact connections for "plug &
play" installation.

Pull your chain? I don't know you well enough...

$200! Ouch. But it's important to get it running after all the delays.

Funny, www.rockauto.com lists for the F23A4:

1.DENSO Part # 2349025 FRONT; w/ Eng. Code F23A4 {OE-TYPE OXYGEN SENSOR
#36531PAAL21} $91.79

2. BOSCH Part # 13493 Interval=100000 {Oxygen Sensor - OE Type Before
Catalyst} $104.79.

(The Bosch 15733 universal I mentioned in an earlier post is only for
downstream in the F23A4, and OK for upstream too only in F23A1).

I think you might have gotten sensors for the LEV (F23A1) and not the
ULEV (F23A4). Just curious, can you provide the part numbers for the
sensors you got? Thanks.


Nasty wrote:
> To review:
>
> The front O2 sensor went out. A multi-fit sensor that was listed for my car
> didn't work. A Bosch sensor new from Advance Auto Parts didn't work
>
> I bought a new one (Densco) from Honda this morning, $200.00 and change with
> tax. So far no CEL and no codes, either hard or pending.
>
> Maybe it's true that the F23A4 will only accept the Densco. Time will tell.
>
> --
> Pull my chain to reply.

<johngdole@hotmail.com> wrote in message
news:1151388109.813203.164550@x69g2000cwx.googlegr oups.com...
> $200! Ouch. But it's important to get it running after all the delays.
>
> Funny, www.rockauto.com lists for the F23A4:

I know they're listed as available. I picked up a statement from another
newsgroup that said ONLY the Honda sensor will work. I don't have a clue why
theirs would be different but I was tired of messing with it.

>
> 1.DENSO Part # 2349025 FRONT; w/ Eng. Code F23A4 {OE-TYPE OXYGEN SENSOR
> #36531PAAL21} $91.79
>
> 2. BOSCH Part # 13493 Interval=100000 {Oxygen Sensor - OE Type Before
> Catalyst} $104.79.
>
> (The Bosch 15733 universal I mentioned in an earlier post is only for
> downstream in the F23A4, and OK for upstream too only in F23A1).
>
> I think you might have gotten sensors for the LEV (F23A1) and not the
> ULEV (F23A4). Just curious, can you provide the part numbers for the
> sensors you got? Thanks.

It's possible. The 'generic' one had bad wiring instructions so I have to
throw that evidence out. I don't have the Bosch part number anymore. The
'generic' one is: 5420 04G04, made in Indonesia. The Honda one
is:36531-PAA-L23.

The old Denso was:192400-1000 07U09.

The first sensor Honda pulled for me had a pigtail that was too short. Turns
out there is a difference in length between the 2dr and the 4dr....


>
>
> Nasty wrote:
>> To review:
>>
>> The front O2 sensor went out. A multi-fit sensor that was listed for my
>> car
>> didn't work. A Bosch sensor new from Advance Auto Parts didn't work
>>
>> I bought a new one (Densco) from Honda this morning, $200.00 and change
>> with
>> tax. So far no CEL and no codes, either hard or pending.
>>
>> Maybe it's true that the F23A4 will only accept the Densco. Time will
>> tell.
>>
>> --
>> Pull my chain to reply.
>

Yeah, looks Honda updated it (L23). That old denso had a weird number,
they are usually 2344xxx. Well it's working now.

Nasty wrote:
> It's possible. The 'generic' one had bad wiring instructions so I have to
> throw that evidence out. I don't have the Bosch part number anymore. The
> 'generic' one is: 5420 04G04, made in Indonesia. The Honda one
> is:36531-PAA-L23.
>
> The old Denso was:192400-1000 07U09.
>
> The first sensor Honda pulled for me had a pigtail that was too short. Turns
> out there is a difference in length between the 2dr and the 4dr....
>

<johngdole@hotmail.com> wrote in message
news:1151469820.083272.143710@j72g2000cwa.googlegr oups.com...
> Yeah, looks Honda updated it (L23). That old denso had a weird number,
> they are usually 2344xxx. Well it's working now.

Can I have an Amen...