Honda Car Forum

#1 (**permalink**) 28 Feb 2006, 04:02 pm

I wanted to know2 if I found some older factory 4 lug wheels will they fit
a 4 lug 1990 accord? older or newer I just want some aluminum factory
wheels instead of crappy steel wheels and hubs. prefer the 14" since the
tires I have are and are newer

#2 (**permalink**) 28 Feb 2006, 05:10 pm

be careful cuz some accords are 110mm center and some are 100mm centers
(different distances between lug nuts).

t

Pd7704 wrote:
>I wanted to know2 if I found some older factory 4 lug wheels will they fit
>a 4 lug 1990 accord? older or newer I just want some aluminum factory
>wheels instead of crappy steel wheels and hubs. prefer the 14" since the
>tires I have are and are newer

--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200602/1

#3 (**permalink**) 28 Feb 2006, 09:49 pm

loewent via CarKB.com wrote:
> be careful cuz some accords are 110mm center and some are 100mm centers
> (different distances between lug nuts).

could be wrong, but i think the accord/prelude use 110, and the civic is
100.

#4 (**permalink**) 28 Feb 2006, 10:07 pm

Pd7704 wrote:
> I wanted to know2 if I found some older factory 4 lug wheels will they fit
> a 4 lug 1990 accord? older or newer I just want some aluminum factory
> wheels instead of crappy steel wheels and hubs. prefer the 14" since the
> tires I have are and are newer

Starting in 1990 the Accord wheel bolt pattern changed to 4 on 115mm.
You also want to measure the center hole of the wheel.

Alan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
can you id this Honda Accord wheel?	pws	Honda 2	6	01 Mar 2006 10:54 pm
can you id this Honda Accord wheel?	pws	Honda 3	6	01 Mar 2006 10:51 pm
Wheel for Honda and Saturn	Chris Lamb	Honda 3	2	18 Jun 2004 11:34 am
Wheel for Honda and Saturn	Chris Lamb	Honda 2	0	17 Jun 2004 10:08 pm
Honda Accord tire comes off wheel	Msgri1	Honda 3	4	11 Dec 2003 08:45 am

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)