Honda Car Forum

charles:

thnx for posting. i'm gonna re-read & digest, & will answer tonight.

do u kno if i can post a photo?

yeah, the mechanic did a few things i didn't like & i don't go to him
anymore.

thnx again,
frank

hi charles: i'll answer ur ?'s via this post & email u a layout with photos
i did. i don't see a way to attach a file within this post.

*Does the motor spin freely when you turn it by hand?
>pretty freely. think it would rotate easier when the shaft is put back
together with the cap, thus centering the shaft better.

*Perhaps the springs hold the connector to the motor so that it doesn't
work loose but that would be unusual. The connectors usually have a
integral locking tab.
>i STILL can't figure out what the springs do & where they go! i tried a
few ways & nothing really seems to be correct.

*Do the mounting holes align easily when you remount the blower? >YES

*Can you screw the bolts into the nuts securely without the blower in the
way? >YES

*If they wobble when fully tightened, you should replace the nuts. >the
blower doesn't really move, & there's NO play side to side. the blower
fits back into the dash fine. it just seems like i can push up on the
blower motor a tad. to be honest, that's prob. the least of my problem!

lemme kno if can read the photo file OK. i saved as a photoshop file. i
can prob. save in other formats if u need it to be different.

thnx,
frank

fcino wrote:
> i can prob. save in other formats if u need it to be different.

While I'm waiting for the photo, I have two questions.

Do you recall if you removed the springs from something inside the blower
assembly or did you just find them lying loose? Could they be the spring clips
which hold the blower housing together?
--
Chuck