Honda Car Forum | |
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| Honda Parts Search |
|
| ||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
On Thu, 23 Jun 2005 21:34:59 -0400, Scott Metzger
<NOsmetzgerSPAM@alltel.net> wrote: >Hi, > >Where is the transaxle fill plug for my 2002 Odyssey? > >Thanks, >Scott on the top behind the air intake tube, it has a 17mm hex but the plug is bigger, and it says ATF on it. Chip |
|
|||
|
chip wrote:
> on the top behind the air intake tube, it has a 17mm hex but the >plug is bigger, and it says ATF on it. > Chip > > hhmmm, still don't see it. 'are intake tube' - is that the tube that runs from the air filter box and then under the engine cover? Do I need to take the engine cover off? Thanks, Scott |
|
|||
|
In article <d87$42bb72ab$471c7b77$14810@ALLTEL.NET>,
Scott Metzger <NOsmetzgerSPAM@alltel.net> wrote: > > on the top behind the air intake tube, it has a 17mm hex but the > >plug is bigger, and it says ATF on it. > > Chip > > > > > > hhmmm, still don't see it. You might not if your van got the oil jet kit during the recall. |
|
|||
|
In article <9b7f8$42bbe34f$471c7b77$25118@ALLTEL.NET>,
Scott Metzger <NOsmetzgerSPAM@alltel.net> wrote: > >You might not if your van got the oil jet kit during the recall. > > > > > > Yes, I got the oil jet kit. So, how does that change things? The oil jet kit splits a tranny fluid return line and routes some of the fluid back into what was originally the tranny fill plug. The recall tested your transmission by having the tech open the fill plug, shine a light down there, and take a picture of the 2nd gear which is right there. The problem was that 2nd gear wasn't being lubricated. If it showed indications of being burned or scorched, they replaced the transmission. If not, they installed the oil jet kit to spray fluid on it to keep it cool and prevent burning or scorching. So now what was originally your fill hole is now filled up with fluid lines. Best bet: use the dipstick tube. |
|
|||
|
On 6/24/05 5:41 AM, in article 9b7f8$42bbe34f$471c7b77$25118@ALLTEL.NET,
"Scott Metzger" <NOsmetzgerSPAM@alltel.net> wrote: > Elmo P. Shagnasty wrote: > >> hmm, still don't see it. >> >> >> >> You might not if your van got the oil jet kit during the recall. >> >> > > Yes, I got the oil jet kit. So, how does that change things? > > Thanks, > Scott They inserted the tube for the oil jet into what was the fill plug. You still fill it at that place, but instead of removing the plug, you remove the bolt that holds the metal tube in place and pull the tube out. It is a 12mm bolt painted blue on mine. |
|
|||
|
On Thu, 23 Jun 2005 23:01:25 -0400, "Elmo P. Shagnasty"
<elmop@nastydesigns.com> wrote: >In article <b48bb$42bb633b$471c7b77$13070@ALLTEL.NET>, > Scott Metzger <NOsmetzgerSPAM@alltel.net> wrote: > >> Where is the transaxle fill plug for my 2002 Odyssey? > >Depends. > >Did your van get the oil jet kit from the recall? wasn't thinking... in the same area find the rubber hose coming to the top of the trans, it goes to a metal tube that is held in by a 12mm bolt, remove the bolt and pull the jet out of the way, fill as normal and replace the jet. the jet goes into a 24mm hex plug. Chip |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Trans fill plug | MADMAN | Honda 2 | 1 | 14 Aug 2006 06:58 pm |
| What is this plug for? 2000 Odyssey. | Xxxxx | Honda 3 | 8 | 18 Apr 2006 11:50 pm |
| What is this plug for? 2000 Odyssey. | Xxxxx | Honda 1 | 4 | 18 Apr 2006 07:15 am |
| What's this plug for? 2000 Odyssey. | Xxxxx | Honda 3 | 2 | 17 Apr 2006 09:35 pm |
| Odyssey transmission fill port | Greg B | Honda 2 | 5 | 23 Mar 2005 01:47 pm |