Honda Car Forum

How do you change the passenger side headlamp on a 1999 Accord (4 cyl)? There is a plastic air intake pipe right in the way. Is the air intake easily removed? I don't see how to replace the lamp without removing the pipe I don't see how the pipe is removed. How do I get the air intake out of the way?

Here is what the service manual says.
1. Remove the front bumper. (Not an easy task.)
2. Disconnect the connectors.
3. Remove the five mounting bolts, then remove the headlight assembly.

The manual also states that, after you remove and replace the front
bumper, you have to re-align the headlamps.

Dick

On Tue, 30 Dec 2003 10:42:15 -0600, "Ender" <anonymous@anonymous.com>
wrote:

>How do you change the passenger side headlamp on a 1999 Accord (4 cyl)? There is a plastic air intake pipe right in the way. Is the air intake easily removed? I don't see how to replace the lamp without removing the pipe I don't see how the pipe is removed. How do I get the air intake out of the way?

Hello; are you serious about the procedure for changing a headlight in the
99 Accord? Wow, what a hassle! This may be something for me to consider, as
I have a 99 and have contemplated getting a new one before it develops any
problems.

Is that the instructions for replacing the headlight assembly or just
the bulb? On my '94 Civic there is also a air intake pipe in the way
when replacing the passenger's side bulb, but this plastic piece can be
removed simply by pulling it up.

Dick wrote:
>
> Here is what the service manual says.
> 1. Remove the front bumper. (Not an easy task.)
> 2. Disconnect the connectors.
> 3. Remove the five mounting bolts, then remove the headlight assembly.
>
> The manual also states that, after you remove and replace the front
> bumper, you have to re-align the headlamps.
>
> Dick
>
> On Tue, 30 Dec 2003 10:42:15 -0600, "Ender" <anonymous@anonymous.com>
> wrote:
>
> >How do you change the passenger side headlamp on a 1999 Accord (4 cyl)? There is a plastic air intake pipe right in the way. Is the air intake easily removed? I don't see how to replace the lamp without removing the pipe I don't see how the pipe is removed. How do I get the air intake out of the way?

Those instructions[removing bumper etc.] are for removing the headlight
assembly...not the light bulb. Changing the bulb is a very easy procedure,
if that is what you are referring to.



"Randolph" <trash@junkmail.com> wrote in message
news:3FF1D5FE.5B4897F3@junkmail.com...
> Is that the instructions for replacing the headlight assembly or just
> the bulb? On my '94 Civic there is also a air intake pipe in the way
> when replacing the passenger's side bulb, but this plastic piece can be
> removed simply by pulling it up.
>
> Dick wrote:
> >
> > Here is what the service manual says.
> > 1. Remove the front bumper. (Not an easy task.)
> > 2. Disconnect the connectors.
> > 3. Remove the five mounting bolts, then remove the headlight .
> >
> > Dick
> >
> > On Tue, 30 Dec 2003 10:42:15 -0600, "Ender" <anonymous@anonymous.com>
> > wrote:
> >
> > >How do you change the passenger side headlamp on a 1999 Accord (4 cyl)?
There is a plastic air intake pipe right in the way. Is the air intake
easily removed? I don't see how to replace the lamp without removing the
pipe I don't see how the pipe is removed. How do I get the air intake out
of the way?

I believe that procedure is for the "head lamp (assembly)", which is the
entire lens/reflector/housing unit.

To replace the "bulb", you merely have to disconnect the plastic air intake
tube, and then do it by hand.

--
'03 S2000
'94 Accord

It's just about going fast...that's all...

http://home.insight.rr.com/cgreen/
"Ed and Linda Brown" <brownle@olypen.com> wrote in message
news:vv3l2qqj4cut62@corp.supernews.com...
> Hello; are you serious about the procedure for changing a headlight in the
> 99 Accord? Wow, what a hassle! This may be something for me to consider,
as
> I have a 99 and have contemplated getting a new one before it develops any
> problems.
>
>

How do you get that plastic air intake removed? It twists a bit but I'm afraid I'l break it if I strong arm it. Does it just twist off?

I bought a bulb at Oreilly auto supply and the salesman came out and
changed the bulb in about 5 minutes. The plastic air intake just snaps out,
and since it was dark I didn't see him remove and replace bulb, but I'm
pretty sure it just twisted out, then new one twisted in.

The salesman said DO NOT touch the glass part of the (new) bulb; apparently
skin oil will cause halogen bulbs to fail quickly.

99 Accord 4 cyl

"Ender" <anonymous@anonymous.com> wrote in message
news:1db6e9c309c56f8aac8debe5d1036fac@localhost.ta lkaboutautos.com...
How do you change the passenger side headlamp on a 1999 Accord (4 cyl)?
There is a plastic air intake pipe right in the way. Is the air intake
easily removed? I don't see how to replace the lamp without removing the
pipe I don't see how the pipe is removed. How do I get the air intake out
of the way?



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.556 / Virus Database: 348 - Release Date: 12/26/2003

On Tue, 30 Dec 2003 10:42:15 -0600, "Ender" <anonymous@anonymous.com>
wrote:

>How do you change the passenger side headlamp on a 1999 Accord (4 cyl)? There is a plastic air intake pipe right in the way. Is the air intake easily removed? I don't see how to replace the lamp without removing the pipe I don't see how the pipe is removed. How do I get the air intake out of the way?

Don't you have an owner manual? The intake pipe just pulls straight up -
if it's never been out before you may have to heave pretty hard. Note: to
change the bulb you do not have to, and should not, loosen the screws which
hold the bulb in. If there's even a slight amount of corrosion on them
you'll find the bulb very hard to turn - a spritz of silicone will allow
the bulb to turn easily.

Rgds, George Macdonald

"Just because they're paranoid doesn't mean you're not psychotic" - Who, me??

stevef wrote:

> I bought a bulb at Oreilly auto supply and the salesman came out and
> changed the bulb in about 5 minutes. The plastic air intake just snaps out,
> and since it was dark I didn't see him remove and replace bulb, but I'm
> pretty sure it just twisted out, then new one twisted in.
>
> The salesman said DO NOT touch the glass part of the (new) bulb; apparently
> skin oil will cause halogen bulbs to fail quickly.

Absolutely, *never* touch a halogen bulb with bare skin.