Honda Car Forum

Is there a way of manually opening and closing the power windows using the
wiring loom connector that plugs into the "Power Windows Master Control
Switch" located on the drivers side door?

I know by bridging wires, this is possible for the central locking and wiper
motor. Can the same be done for power windows?

Any help would be much appreciated.

Do you have a wiring diagram? The diagram should get you bridging
wires in no time.

Otherwise get access closest to the motor to see the wiring coloring.

Not sure what you want exactly but I would use a DMM to find which
wire goes to the motor. Usually indicating a low resistance but still
uncertain and a wrong advice. If you decide to go ahead, the greatest
damage may be to the control unit. The driver side diagram indicates a
control unit for the motor on some models.
Koiji

> Is there a way of manually opening and closing the power windows using the
> wiring loom connector that plugs into the "Power Windows Master Control
> Switch" located on the drivers side door?
>
> I know by bridging wires, this is possible for the central locking and wiper
> motor. Can the same be done for power windows?
>
> Any help would be much appreciated.