Honda Car Forum

#1 (**permalink**) 19 Aug 2003, 02:26 pm

Thanks I'll post another new post (Bad start in hot weather) with all the
things happening so answer if you think you know what is happening.

"'Curly Q. Links'" <motsco_@_interbaun.com> wrote in message
news:3F423A2F.7F241F1@_interbaun.com...
> MArk wrote:
> >
> > Does anyone know what would be the reason why my car (FI)
> > starts correctly in hot weather with throttle pedal pushed when
> > igniting and it starts very poorely when started without throttle
> > pedal pushed (also on hot weahter)?
> > It ignites ok on cold weather, and when restarted shortly after beeing
> > driven it also ignites ok.
>
> ---------------------
> MArk,
> I think a leaking injector will give this symptom, because it will allow
> the fuel pressure to 'bleed' out and flood the engine (or at least one
> cylinder) so you have to start it with the pedal pressed. Try listening
> to how long your fuel pump runs each time you watch turn the key to ON.
>
> The manual for the Odyssey mentions that you should press the pedal
> during some conditions, and
>
> If I thought there was a problem with mine, I'd run another tank of
> ethanol blended fuel through it. In Canada we have Mohawk Plus, which is
> safe, according to the Honda manual.
>
> 'Curly'
> -----------------------
>
> To REPLY: If there are a couple of underscores in my return address,
> you must remove them to reply directly . . . . . . Thanks.
>
> Regarding stage performances: When everyone else has finished playing,
> you should not play any notes you have left over. -

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ignition...	B:L	Acura	0	29 Dec 2005 10:56 am
Ignition cut-out	Michael Pardee	Honda 2	32	27 Dec 2005 01:13 pm
Re: Ignition cut-out	Elle	Honda 2	0	27 Dec 2005 12:09 pm
ignition	Rattus the RAT	Honda 3	5	19 Dec 2004 06:53 pm
Ignition Key Gets Hot	Carl	Honda 2	7	23 Sep 2003 02:16 pm

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)