Honda Car Forum

if it is like the Civics, it will slide right off. The thing to watch out
for is the outer race staying on the spindle from the heat. Using a cold
chisel to get off the backing plate, then install the new hub assembly from
Honda.

--
Charles Tague
93 Honda Civic DX HB
1.6L SOHC VTEC 14.85 @ 89 mph,1.98 60 ft.
With ZEX 85 hp ZEX 13.09 @ 103 mph, 1.81 60ft.
86 Pontiac Trans Am
225/50/15 GForce Drag Radials
305 peanut cammed 15.29 @ 88 mph
http://home.cinci.rr.com/mistab0ne/
"nospam@spam-magent.com" <cheapercheapo@aol.com> wrote in message
news:877d638d.0307281425.6eb37b77@posting.google.c om...
> Hi,
>
> The rear bearing on my 96 Accord ex 4 cyl with rear disc brake is
> making noise and I guess it is time to replace it.
>
> What I got from reading the Honda service manual is it seems like the
> hub/bearing assy will just slide off the spindle after removing the
> spindle nut.
>
> Do I need a slide hammer puller or a jaw puller for the job? I am
> worry it won't slide out when I have everything apart.
>
> I also want to know the spindle nut size so I can get a socket,
>
> Anyone has done this please let me know.
>
> Any advice is welcome.