Honda Car Forum

Danny Long wrote:
>
> I just got the ignition switch on my 96 prelude si replaced and now my
> abs light is on. The one thing I can think my have cause it was I had
> a bit of rust bulid up on my rotors because the car had been in my
> drive way for 4 weeks before I got the ignition switch fixed.Or maybe
> its due to the prior problem I had with the ignition switch and the
> abs light needs to be reset.A couple of weeks ago I was reading
> something about taking the abs fuse out under the hood for 15 seconds
> and then puting it back in to make the light go off. Anybody have any
> experience with this problem and a quick fix. I sure don't want to
> have to replace any abs parts$$$$$$. Thanks in advance, Danny
--------------------------------------

Danny,
Make sure your park brake isn't 'notched up' one click... that will do
it too.

'Curly'

-----------------------------------------------
--

To REPLY: You must remove two underscores from the return address to
reply directly . . . . . .

Regarding stage performances: When everyone else has finished playing,
you should not play any notes you have left over. -

> --------------------------------------
>
> Danny,
> Make sure your park brake isn't 'notched up' one click... that will do
> it too.

Parking brake is ok. This problem only started when the igition was
getting fixed. Its possible that the guy working on it drove it with
the brake up. I wasn't there so I can't say. But if having the parking
brake up once caused this light to come on every time I drive it now,
is their any way by taking out the fuse then putting it back in , can
that fix the light from coming back on ?.Will that do any damage long
term? Thanks Danny