Honda Car Forum |
|
|
|||||||
| Register | FAQ | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
| Honda Parts Search |
|
| ||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Some say as much as 300k km....
cheerio. "twfsa" <uksatw@qwest.net> wrote in message news:nmb6e.206$yO2.188@lakeread07... > How often does the rotor require replaceing? > > Tom > > "motsco_ _" <"motsco_ _"@interbaun.com> wrote in message > news:4258104F.50002@interbaun.com... >> Bud Campbell via CarKB.com wrote: >>> I am trying to change the dist. rotor on a 97 CR-V, but can't get a >>> screwdriver or ratchet behind it to loosen the screw. Any ideas or >>> help?? >>> thanks >> >> >> ----------------------- >> >> The screw head has to be facing the firewall for you to get at it . . >> Turn the engine over using the starter and / or power steering pulley nut >> to get it there. Be sure to use a large phillips screwdriver, or grind a >> few thousandths off the tip of whatever you have if it doesn't fit the >> screw PERFECTLY. A drywaller's large tip might fit well. You'll probably >> need lots of torque to get it out, so don't start by wrecking the screw >> with an incorrect tip. >> >> http://www.hondasuv.com/stg/viewtopic.php?t=8173 >> >> You can also slip the distributor out in about five minutes, but make >> sure to mark the exact position of the timing adjustment, and replace the >> O-ring when you reassemble. >> >> 'Curly' >> > > |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| rotor warpage | krhine | Acura | 4 | 18 Feb 2007 01:26 pm |
| 99' Accord Brake Squeak - just replaced brakes, rotor and rotor again | RvBTucker@gmail.com | Honda 3 | 7 | 20 Jul 2005 09:15 pm |
| 92 civic 1.5 dist. seal | becklesnjohn | Honda 3 | 2 | 06 Apr 2005 12:07 pm |
| Distributor rotor | vw | Acura | 5 | 13 Dec 2004 11:58 pm |
| Dist Cap | Mike | Honda 2 | 2 | 10 Aug 2004 12:00 pm |