Honda Car Forum

Not quite sure--does the assembly merely twist out, or do I have to
loosen or remove those three silver screws, or .....

Thanks,

Jeff

"Jeff" <jeff@invalid.net> wrote in message
news:jeff-9D4222.11060319092004@news.central.cox.net...
> Not quite sure--does the assembly merely twist out, or do I have to
> loosen or remove those three silver screws, or .....

If you have the Owners Manual for the car, it will have detailed
instructions for the removal and replacement of the bulb. Other than that,
it should be a simple matter of simply turning the retainer ring in one
direction to allow the release of the bulb.

--
Brian

http://www.cakesbydarlene.ca

http://www.accesswave.ca/~orion

In article <8oh3d.69662$vO1.367929@nnrp1.uunet.ca>,
"Brian Smith" <Halifax@NovaScotia.Canada> wrote:

> "Jeff" <jeff@invalid.net> wrote in message
> news:jeff-9D4222.11060319092004@news.central.cox.net...
> > Not quite sure--does the assembly merely twist out, or do I have to
> > loosen or remove those three silver screws, or .....
>
> If you have the Owners Manual for the car, it will have detailed
> instructions for the removal and replacement of the bulb. Other than that,
> it should be a simple matter of simply turning the retainer ring in one
> direction to allow the release of the bulb.

You're right it was simple, thanks to your tip here.

have a great day Brian.

Jeff

"Jeff" <jeff@invalid.net> wrote in message
news:jeff-28A9A3.12270119092004@news.central.cox.net...
>
> You're right it was simple, thanks to your tip here.
>
> have a great day Brian.

You're welcome, and I did <g>.

--
Brian

http://www.cakesbydarlene.ca

http://www.accesswave.ca/~orion