Honda Car Forum

 

Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Honda Acura > Honda 2
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read
Honda Parts Search  


Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 11 Jan 2004, 11:38 pm
LC
 
Posts: n/a
Default AWD CR-V tire thread tolerance

My 2003 AWD CR-V EX had a flat on the front passenger side after 15,000
miles. I found there was quite a significant thread depth difference between
the new tire and the worn tires. The other AWD car, a Subaru, I used to own
had a very tight tolerance for tire diameter difference. What about the
CR-V? Can I use the spare with the other three worn tires?

TIA


Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old 11 Jan 2004, 11:53 pm
CaptainKrunch
 
Posts: n/a
Default Re: AWD CR-V tire thread tolerance

What does your owner's manual state?

CaptainKrunch


"LC" <LC@NoSpam.com> wrote in message
news:PwpMb.12729$dp1.7193@nwrdny02.gnilink.net...
> My 2003 AWD CR-V EX had a flat on the front passenger side after 15,000
> miles. I found there was quite a significant thread depth difference

between
> the new tire and the worn tires. The other AWD car, a Subaru, I used to

own
> had a very tight tolerance for tire diameter difference. What about the
> CR-V? Can I use the spare with the other three worn tires?
>
> TIA
>
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 12 Jan 2004, 11:12 am
LC
 
Posts: n/a
Default Re: AWD CR-V tire thread tolerance

I did check the manual. I don't think it has anything on the thread depth
difference tolerance. However it does mention that different tire diameters
can have an adverse effect on the ABS as the ABS is constantly monitoring
the speed of each wheel. It comes short of saying the tolerance is 1/4" or
1".

LC

"CaptainKrunch" <nothing@nobody.com> wrote in message
news:Y_KdndTvQqOpup_dRVn-hA@comcast.com...
> What does your owner's manual state?
>
> CaptainKrunch
>
>
> "LC" <LC@NoSpam.com> wrote in message
> news:PwpMb.12729$dp1.7193@nwrdny02.gnilink.net...
> > My 2003 AWD CR-V EX had a flat on the front passenger side after 15,000
> > miles. I found there was quite a significant thread depth difference

> between
> > the new tire and the worn tires. The other AWD car, a Subaru, I used to

> own
> > had a very tight tolerance for tire diameter difference. What about the
> > CR-V? Can I use the spare with the other three worn tires?
> >
> > TIA
> >
> >

>
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old 13 Jan 2004, 05:33 am
Dave Dodson
 
Posts: n/a
Default Re: AWD CR-V tire thread tolerance



"LC" <LC@NoSpam.com> wrote in message
news:ZHzMb.11714$TC6.8902@nwrdny03.gnilink.net...
> I did check the manual. I don't think it has anything on the thread depth
> difference tolerance. However it does mention that different tire

diameters
> can have an adverse effect on the ABS as the ABS is constantly monitoring
> the speed of each wheel. It comes short of saying the tolerance is 1/4" or
> 1".
>
> LC
>
> "CaptainKrunch" <nothing@nobody.com> wrote in message
> news:Y_KdndTvQqOpup_dRVn-hA@comcast.com...
> > What does your owner's manual state?
> >
> > CaptainKrunch
> >
> >
> > "LC" <LC@NoSpam.com> wrote in message
> > news:PwpMb.12729$dp1.7193@nwrdny02.gnilink.net...
> > > My 2003 AWD CR-V EX had a flat on the front passenger side after

15,000
> > > miles. I found there was quite a significant thread depth difference

> > between
> > > the new tire and the worn tires. The other AWD car, a Subaru, I used

to
> > own
> > > had a very tight tolerance for tire diameter difference. What about

the
> > > CR-V? Can I use the spare with the other three worn tires?
> > >
> > > TIA

You say there was a significant difference in tread depth. What was the
measurement on both the new and old tire?

Dave D
--
Hunt hard...Kill quick...Offer No Apologies!> > >


Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old 13 Jan 2004, 01:40 pm
'Curly Q. Links'
 
Posts: n/a
Default Re: AWD CR-V tire thread tolerance

LC wrote:
>
> My 2003 AWD CR-V EX had a flat on the front passenger side after 15,000
> miles. I found there was quite a significant thread depth difference between
> the new tire and the worn tires. The other AWD car, a Subaru, I used to own
> had a very tight tolerance for tire diameter difference. What about the
> CR-V? Can I use the spare with the other three worn tires?
>
> TIA


=====================

LC,


The manual doesn't really push it, but CRV, Pilot, and Element should
use a five-tire rotation to avoid the mess you're in now. I'd just put a
few pounds less in the new tire, and run the old tires at the higher end
of the inflation range. Like 29, 32, 32, 32.

I'd also be more concerned about the load on the rear differential than
the ABS getting fooled... ABS isn't that sensitive unless you're mixing
a completely different tire in the mix.

'Curly'
==================
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old 13 Jan 2004, 11:06 pm
LC
 
Posts: n/a
Default Re: AWD CR-V tire thread tolerance

3/16" to 1/4". I've put the new tire on the front passenger side. So far I'm
driving very cautiously and can't tell any difference in handling.


"Dave Dodson" <ddodson@gci.net> wrote in message
news:1007ich9hlrj252@corp.supernews.com...
>
>
> "LC" <LC@NoSpam.com> wrote in message
> news:ZHzMb.11714$TC6.8902@nwrdny03.gnilink.net...
> > I did check the manual. I don't think it has anything on the thread

depth
> > difference tolerance. However it does mention that different tire

> diameters
> > can have an adverse effect on the ABS as the ABS is constantly

monitoring
> > the speed of each wheel. It comes short of saying the tolerance is 1/4"

or
> > 1".
> >
> > LC
> >
> > "CaptainKrunch" <nothing@nobody.com> wrote in message
> > news:Y_KdndTvQqOpup_dRVn-hA@comcast.com...
> > > What does your owner's manual state?
> > >
> > > CaptainKrunch
> > >
> > >
> > > "LC" <LC@NoSpam.com> wrote in message
> > > news:PwpMb.12729$dp1.7193@nwrdny02.gnilink.net...
> > > > My 2003 AWD CR-V EX had a flat on the front passenger side after

> 15,000
> > > > miles. I found there was quite a significant thread depth difference
> > > between
> > > > the new tire and the worn tires. The other AWD car, a Subaru, I used

> to
> > > own
> > > > had a very tight tolerance for tire diameter difference. What about

> the
> > > > CR-V? Can I use the spare with the other three worn tires?
> > > >
> > > > TIA

> You say there was a significant difference in tread depth. What was the
> measurement on both the new and old tire?
>
> Dave D
> --
> Hunt hard...Kill quick...Offer No Apologies!> > >
>
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old 13 Jan 2004, 11:08 pm
LC
 
Posts: n/a
Default Re: AWD CR-V tire thread tolerance

Since I've put the new tire on the font passenger side, the rear diff
shouldn't be affected, should it? BTW, is there a front diff?


"'Curly Q. Links'" <motsco__@interbaun.com> wrote in message
news:40043BB3.8B3BFBED@interbaun.com...
> LC wrote:
> >
> > My 2003 AWD CR-V EX had a flat on the front passenger side after 15,000
> > miles. I found there was quite a significant thread depth difference

between
> > the new tire and the worn tires. The other AWD car, a Subaru, I used to

own
> > had a very tight tolerance for tire diameter difference. What about the
> > CR-V? Can I use the spare with the other three worn tires?
> >
> > TIA

>
> =====================
>
> LC,
>
>
> The manual doesn't really push it, but CRV, Pilot, and Element should
> use a five-tire rotation to avoid the mess you're in now. I'd just put a
> few pounds less in the new tire, and run the old tires at the higher end
> of the inflation range. Like 29, 32, 32, 32.
>
> I'd also be more concerned about the load on the rear differential than
> the ABS getting fooled... ABS isn't that sensitive unless you're mixing
> a completely different tire in the mix.
>
> 'Curly'
> ==================



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old 14 Jan 2004, 12:29 am
'Curly Q. Links'
 
Posts: n/a
Default Re: AWD CR-V tire thread tolerance

LC wrote:
>
> Since I've put the new tire on the font passenger side, the rear diff
> shouldn't be affected, should it? BTW, is there a front diff?
>
> "'Curly Q. Links'" <motsco__@interbaun.com> wrote in message
> news:40043BB3.8B3BFBED@interbaun.com...
> > LC wrote:
> > >
> > > My 2003 AWD CR-V EX had a flat on the front passenger side after 15,000
> > > miles. I found there was quite a significant thread depth difference

> between
> > > the new tire and the worn tires. The other AWD car, a Subaru, I used to

> own
> > > had a very tight tolerance for tire diameter difference. What about the
> > > CR-V? Can I use the spare with the other three worn tires?
> > >
> > > TIA

> >
> > =====================
> >
> > LC,
> >
> >
> > The manual doesn't really push it, but CRV, Pilot, and Element should
> > use a five-tire rotation to avoid the mess you're in now. I'd just put a
> > few pounds less in the new tire, and run the old tires at the higher end
> > of the inflation range. Like this: 29, 32, 32, 32.
> >
> > I'd also be more concerned about the load on the rear differential than
> > the ABS getting fooled... ABS isn't that sensitive unless you're mixing
> > a completely different sized tire in the mix.
> >
> > 'Curly'
> > ==================


==============
LC,

Don't lose any sleep over it, but that's a good question. Yes, the front
differential is inside the same box as the tranny, so to prevent
long-term wear-and-tear, you could underinflate that new tire by 3-4 lb
compared to the driver's side tire, like I mentioned above. Handling
wouldn't suffer at all unless you have too big a spread, then you'll
feel some pull to one side.

Make sure you own a good tire guage that goes to like 60 lb, not 150 lb.

We just spent $180 (but it was only Canadian) to buy one of those
STINKIN Dueller OEM Bridgestone tires because the previous owner of our
CRV didn't include the SPARE in any of the (many) tire rotations.
:-(

'Curly'

--
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #9 (permalink)  
Old 14 Jan 2004, 10:19 am
LC
 
Posts: n/a
Default Re: AWD CR-V tire thread tolerance

Thanks for the advice.

"'Curly Q. Links'" <motsco__@interbaun.com> wrote in message
news:4004D3D2.8BA181BA@interbaun.com...
> LC wrote:
> >
> > Since I've put the new tire on the font passenger side, the rear diff
> > shouldn't be affected, should it? BTW, is there a front diff?
> >
> > "'Curly Q. Links'" <motsco__@interbaun.com> wrote in message
> > news:40043BB3.8B3BFBED@interbaun.com...
> > > LC wrote:
> > > >
> > > > My 2003 AWD CR-V EX had a flat on the front passenger side after

15,000
> > > > miles. I found there was quite a significant thread depth difference

> > between
> > > > the new tire and the worn tires. The other AWD car, a Subaru, I used

to
> > own
> > > > had a very tight tolerance for tire diameter difference. What about

the
> > > > CR-V? Can I use the spare with the other three worn tires?
> > > >
> > > > TIA
> > >
> > > =====================
> > >
> > > LC,
> > >
> > >
> > > The manual doesn't really push it, but CRV, Pilot, and Element should
> > > use a five-tire rotation to avoid the mess you're in now. I'd just put

a
> > > few pounds less in the new tire, and run the old tires at the higher

end
> > > of the inflation range. Like this: 29, 32, 32, 32.
> > >
> > > I'd also be more concerned about the load on the rear differential

than
> > > the ABS getting fooled... ABS isn't that sensitive unless you're

mixing
> > > a completely different sized tire in the mix.
> > >
> > > 'Curly'
> > > ==================

>
> ==============
> LC,
>
> Don't lose any sleep over it, but that's a good question. Yes, the front
> differential is inside the same box as the tranny, so to prevent
> long-term wear-and-tear, you could underinflate that new tire by 3-4 lb
> compared to the driver's side tire, like I mentioned above. Handling
> wouldn't suffer at all unless you have too big a spread, then you'll
> feel some pull to one side.
>
> Make sure you own a good tire guage that goes to like 60 lb, not 150 lb.
>
> We just spent $180 (but it was only Canadian) to buy one of those
> STINKIN Dueller OEM Bridgestone tires because the previous owner of our
> CRV didn't include the SPARE in any of the (many) tire rotations.
> :-(
>
> 'Curly'
>
> --



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #10 (permalink)  
Old 14 Jan 2004, 12:07 pm
Dave Dodson
 
Posts: n/a
Default Re: AWD CR-V tire thread tolerance



"LC" <LC@NoSpam.com> wrote in message
news:cf3Nb.14753$Qq.5696@nwrdny01.gnilink.net...
> 3/16" to 1/4". I've put the new tire on the front passenger side. So far

I'm
> driving very cautiously and can't tell any difference in handling.
>

///snipped for brevity///
> "Dave Dodson" <ddodson@gci.net> wrote in message
> news:1007ich9hlrj252@corp.supernews.com...
> > You say there was a significant difference in tread depth. What was the
> > measurement on both the new and old tire?
> >
> > Dave D
> > --
> > Hunt hard...Kill quick...Offer No Apologies!> > >


Tire tread depth (in the U.S.) is measured in */32. I don't know why but it
is. So from your measurements your tread depths are 3/16 or 6/32 and 1/4 or
8/32 for a difference of 2/32. This difference is really insignificant and
neither you nor the vehicle should notice any difference in handling,
steering, braking, or driveability....

Dave D
--
Hunt hard...Kill quick...Offer No Apologies!
> >
> >

>
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
head thread repair on aluminum block Ryan Underwood Honda 3 56 10 Oct 2006 06:08 pm
crank bolt right or left hand thread? swhaley Honda 2 31 19 Jul 2006 11:24 pm
crank bolt left or right hand thread?? swhaley Honda 3 22 11 Jul 2006 04:56 pm
89 accord crankshaft bolt Left or right hand thread. steve Honda 2 3 16 Jan 2004 04:15 pm
AWD CR-V tire thread tolerance LC Honda 3 12 16 Jan 2004 09:24 am


All times are GMT -5. The time now is 06:19 am.


Attribution:
Honda News | Autoblog
Powered by Yahoo Answers




Powered by vBulletin®
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.3.0 © 2009, Crawlability, Inc.