Honda Car Forum

i have a a 1985 hatchback civic 1.5 manual and i would like to put the
cv joints from my 1986 1.5 auto into the 85? ...

if any1 knows if this is possible could you please let me know

also the size of the nut on the end of the cv joint ?


thank ..matt

badciv4/22/08 3:221112830_2bffb459077f3d68b5044f5e722cff28@0000. com

> i have a a 1985 hatchback civic 1.5 manual and i would like to put the
> cv joints from my 1986 1.5 auto into the 85? ...
>
> if any1 knows if this is possible could you please let me know
>
> also the size of the nut on the end of the cv joint ?
>
>
> thank ..matt
Learn how to use parts diagrams on Honda dealers web site. If the part
number is the same for the two cars then it is probably the same part. If
the number is different you will probably have a problem. This is the
easiest web site I have found to use. Punch in the year of the car in two
separate passes and record the part number for the driveshaft.
http://www.hondapartscheap.com/southbay/jsp/home.jsp

If you want to know the size of the nut on the axle then you will need to
peek at the same parts list to find that it is 22 mm for the 1985 3 dr. More
details may be had from the service manual.

--
Pickleman
halfsour@roadyourpantsrunner.com
Please remove "yourpants" to reply
1998 Civic HX MT with 142K
2000 CRV EX MT with 98K

badciv wrote:
> i have a a 1985 hatchback civic 1.5 manual and i would like to put the
> cv joints from my 1986 1.5 auto into the 85? ...

don't know about those model years, but they're interchangeable on the
88-91, and then 92-2000 civics. so my guess would be "yes".



>
> if any1 knows if this is possible could you please let me know
>
> also the size of the nut on the end of the cv joint ?

drive to sears and buy a 32mm socket. try it in the parking lot. if it
doesn't fit, take it back and keep trying until you find the one that does.