Honda Car Forum

The passenger side doors will not lock or unlock when you unlock the
doors with the remote or from the door switch.... Has anybody else had this
problem.... If so what needs to be done to fix it... The switch on the
passenger front door will unlock the other doors on the drivers side but not
the passenger side....

thanks

Paul

You got the "main" switch on the driver door in the off position? bob

"P.M. McDonough" wrote:
>
> The passenger side doors will not lock or unlock when you unlock the
> doors with the remote or from the door switch.... Has anybody else had this
> problem.... If so what needs to be done to fix it... The switch on the
> passenger front door will unlock the other doors on the drivers side but not
> the passenger side....
>
> thanks
>
> Paul

"P.M. McDonough" <mcdonoughp@eoni.com> wrote in message news:<vglr991so4baed@corp.supernews.com>...
> The passenger side doors will not lock or unlock when you unlock the
> doors with the remote or from the door switch.... Has anybody else had this
> problem.... If so what needs to be done to fix it... The switch on the
> passenger front door will unlock the other doors on the drivers side but not
> the passenger side....
>
> thanks
>
> Paul

without doing input tests, the most likely culprit is the passengers multiplex unit.
Chip

"Chip Stein" <chip@chipanddebby.com> wrote in message
news:5ddcea74.0307081758.1fe9956b@posting.google.c om...
> "P.M. McDonough" <mcdonoughp@eoni.com> wrote in message
news:<vglr991so4baed@corp.supernews.com>...
> > The passenger side doors will not lock or unlock when you unlock the
> > doors with the remote or from the door switch.... Has anybody else had
this
> > problem.... If so what needs to be done to fix it... The switch on the
> > passenger front door will unlock the other doors on the drivers side but
not
> > the passenger side....
> >
> > thanks
> >
> > Paul
>
> without doing input tests, the most likely culprit is the passengers
multiplex unit.
> Chip

This may help (very common).The procedure to reset the multi-plex unit is as
follows.

1. key in off position
2. place wiper switch to intermitant
3. place timer knob to the middle of dial.
4. turn key to on position.