Honda Car Forum

When I start up my 1993 Honda civiv ex I notice a mtal grinding sound
coming from I think the engine. When I am driving the car I am also
noticing the sound ...could be the belts or is there something wrong
w/the engine???

piperspost@webtv.net wrote:
> When I start up my 1993 Honda civiv ex I notice a mtal grinding sound
> coming from I think the engine. When I am driving the car I am also
> noticing the sound ...could be the belts or is there something wrong
> w/the engine???
>
---------------------

Hmmmmmm. Oil light burnt out last year ? ?

Seriously, look inside the distributor for red dust (rust). Report back.

'Curly'

<piperspost@webtv.net> wrote in message
news:15865-4758BCA0-11@storefull-3336.bay.webtv.net...
> When I start up my 1993 Honda civiv ex I notice a mtal grinding sound
> coming from I think the engine. When I am driving the car I am also
> noticing the sound ...could be the belts or is there something wrong
> w/the engine???

Have you opened your hood to see if anything is amiss?

On Dec 6, 10:23 pm, pipersp...@webtv.net wrote:
> When I start up my 1993 Honda civiv ex I notice a mtal grinding sound
> coming from I think the engine. When I am driving the car I am also
> noticing the sound ...could be the belts or is there something wrong
> w/the engine???

Could be anything. Worse/scariest sound I ever heard was from under
the hood of a Prelude like 82? 84? which sounded like it thrown all
the rods, not just one. Worse, because it was a friend of mine's and I
was just about to return it. turns out, I had left it with the (huge)
hood up for a while when I went in, and the wind had slammed the hood
shut and folded the support rod in half, so that the new elbow on it
was just long enough to clang on a pulley.

The problem is now fixed, it ended up being an idle pulley

piperspost@webtv.net wrote:
> The problem is now fixed, it ended up being an idle pulley
>

thanks for posting follow-up.

just had the same failure on my 98 civic.

I replaced the idler pulley several years ago, with OEM parts ($65 IIRC).
This time I went aftermarket, $38.

Be sure not to overtension the belt.

t

jim beam wrote:
>> The problem is now fixed, it ended up being an idle pulley
>
>thanks for posting follow-up.

--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200712/1