Honda Car Forum

Recently replaced the sway bar link bushings on my 1995 Honda Accord
and after the first rain with them they really squeak a lot. Should i
have put oil/lube on them while installing or are they not tight
enough? I tightened the top nut down just as much as the old ones
were. Any help? thanks.

--
Posted at author's request, using http://www.AutoBoardz.com interface
Articles individually verified to usenet standards. Visit URL to contact author/report abuse
Thread archive: http://www.AutoBoardz.com/squeaky-sw...ict209743.html

meciboy wrote:
> Recently replaced the sway bar link bushings on my 1995 Honda Accord
> and after the first rain with them they really squeak a lot. Should i
> have put oil/lube on them while installing or are they not tight
> enough? I tightened the top nut down just as much as the old ones
> were. Any help? thanks.
>
are they oem rubber or aftermarket urethane?

meciboy <none@000.com> wrote in news:993034_
49de9bc63597f132218b34ed887218c3@autoboardz.com:

> Recently replaced the sway bar link bushings on my 1995 Honda Accord
> and after the first rain with them they really squeak a lot. Should i
> have put oil/lube on them while installing or are they not tight
> enough? I tightened the top nut down just as much as the old ones
> were. Any help? thanks.
>


You're using aftermarket urethane bushings. You need to put _silicone_
grease on them before installation and be prepared to pull them apart and
regrease once in a while.

Or you can install OEM and forget about them.

--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/