Honda Car Forum

Today, when parked at Home Depot (where I highly suspect they don't sweep
the parking
lots frequently enough), I happened to notice a small screw stuck in my
front drivers-side tire (Michelin MXV4 plus). The tire did not seem flat
(in fact it was
overinflated slightly, but I had just got the car inspected in NJ and maybe
they inflate the tires as part of the inspection... who knows).

Anyway, I removed the screw by turning counter-clockwise with a pair or
pliers. I estimate that the screw was stuck in around 3/16ths of an inch
(MAYBE as much as 1/4" though). It was in one of the deep gaps that
surround the circumference of the tire, but was sticking in at an angle (not
straight in).
The diameter of the screw may have been as much as 1/8" (including the
threads) depending on how far in it actually was.

I plan on putting some soapy water onto the small hole where the screw was.
If I don't find any evidence of leakage, and if the tire hold pressure, then
the question is:

Should I:

1) Do nothing.

or

2) Put a dab of sealant on the OUTSIDE just to help protect the area in case
I run over debris there. If so, then what do I use (silicone, or something
else?)

or

3) Take the tire to a repair shop and have it patched from the inside as a
precautionary measure

Let me know what you think?

Thanks,

J.

eom

If it doesn't leak I wouldn't worry about it.