Honda Car Forum

I have a 1994 honda prelude and i am in the prosses of taking the motor out and i am stuck i have alredy detached all the parts from the block itself and i am trying to pull it out but when ever i begin to pull the block it always gets stuck on the transsmision now i have tried to drop it striaght down but with knoe luck do you have any suggestions to make my life allitle easier

--
Ludedude94

-----------------------------------------------------------------------
View this thread: http://www.carstalk.net/viewtopic-404819.htm

Send from http://www.carstalk.ne

Ludedude94 wrote:
>
> I have a 1994 honda prelude and i am in the prosses of taking the motor
> out and i am stuck i have alredy detached all the parts from the block
> itself and i am trying to pull it out but when ever i begin to pull the
> block it always gets stuck on the transsmision now i have tried to drop
> it striaght down but with knoe luck do you have any suggestions to make
> my life allitle easier?
>

Have you pulled both axles? In addition, are you using a tilt bar? You can
see several examples here http://tinyurl.com/p9s2s. While I haven't pulled
a motor on a '94 'Lude, other Honda motors I've pulled require you to use a
tilt bar to angle the engine rather steeply before it will come out.

Eric