Honda Car Forum |
|
11 Feb 2006, 07:31 pm
|
|||
|
|||
CRV 2006 help
My mom has a 2006 CR-V automatic trans, when you start the engine put it
into drive and move foward about 50 ft you hear a clanking noise from the front, it will only make this noise when the engine has been shut off, re-started and put in drive. After you hear the clanking noise you will not hear it again driveing in town until you shut it off and re-start the engine. Thanks Tom     
|
|
12 Feb 2006, 02:02 pm
|
|||
|
|||
|
Re: CRV 2006 help
Waiving the right to remain silent, "twfsa" <twfuksa@qwest.net>
said: > My mom has a 2006 CR-V automatic trans, when you start the > engine put it into drive and move foward about 50 ft you hear a > clanking noise from the front, it will only make this noise when > the engine has been shut off, re-started and put in drive. > > After you hear the clanking noise you will not hear it again > driveing in town until you shut it off and re-start the engine. The car is in warranty. Bring it to the dealer. -- Larry J. - Remove spamtrap in ALLCAPS to e-mail "I've come here to enjoy nature. Don't talk to me about the environment!" - 'Denny Crane'
|
|
12 Feb 2006, 06:22 pm
|
|||
|
|||
|
Re: CRV 2006 help
Probably anti lock brakes waking up. Probably normal.
"twfsa" <twfuksa@qwest.net> wrote in message news:mlvHf.48158$bF.6705@dukeread07... > My mom has a 2006 CR-V automatic trans, when you start the engine put it > into drive and move foward about 50 ft you hear a clanking noise from the > front, it will only make this noise when the engine has been shut off, > re-started and put in drive. > > After you hear the clanking noise you will not hear it again driveing in > town until you shut it off and re-start the engine. > > Thanks > Tom > > >
|
|
12 Feb 2006, 10:12 pm
|
|||
|
|||
|
Re: CRV 2006 help
I think I'll call the dealer and see what they have to say, or else it will
have to wait till the dealer does the first oil change and can look at it, I think its the nature of the beast myself, if it did it all the time from every stop then I would be concerned. Tom "Art" <begunaNOSPAMPLEASE@mindspring.com> wrote in message news  qPHf.10434$Nv2.7771@newsread1.news.atl.earth link.net...> Probably anti lock brakes waking up. Probably normal. > > > "twfsa" <twfuksa@qwest.net> wrote in message > news:mlvHf.48158$bF.6705@dukeread07... >> My mom has a 2006 CR-V automatic trans, when you start the engine put it >> into drive and move foward about 50 ft you hear a clanking noise from the >> front, it will only make this noise when the engine has been shut off, >> re-started and put in drive. >> >> After you hear the clanking noise you will not hear it again driveing in >> town until you shut it off and re-start the engine. >> >> Thanks >> Tom >> >> >> > >
|
|
14 Feb 2006, 11:06 pm
|
|||
|
|||
|
Re: CRV 2006 help
On Sun, 12 Feb 2006 21:12:32 -0600, "twfsa" <twfuksa@qwest.net> wrote:
>I think I'll call the dealer and see what they have to say, or else it will >have to wait till the dealer does the first oil change and can look at it, I >think its the nature of the beast myself, if it did it all the time from >every stop then I would be concerned. > >Tom > > >"Art" <begunaNOSPAMPLEASE@mindspring.com> wrote in message >news qPHf.10434$Nv2.7771@newsread1.news.atl.eart hlink.net...>> Probably anti lock brakes waking up. Probably normal. >> >> >> "twfsa" <twfuksa@qwest.net> wrote in message >> news:mlvHf.48158$bF.6705@dukeread07... >>> My mom has a 2006 CR-V automatic trans, when you start the engine put it >>> into drive and move foward about 50 ft you hear a clanking noise from the >>> front, it will only make this noise when the engine has been shut off, >>> re-started and put in drive. >>> >>> After you hear the clanking noise you will not hear it again driveing in >>> town until you shut it off and re-start the engine. >>> >>> Thanks >>> Tom It's called pad shift. the brake pads are shifting in the caliper mount. It's normal. don't bother asking the dealer. Chip
|
|
15 Feb 2006, 07:13 am
|
|||
|
|||
|
Re: CRV 2006 help
I don't think its pad shift if that were the case it would make that noise
after you back up and go foward, which it does not do as my 2001 CR-v does, but thanks for your reply. Tom "chip" <hs4797@brevard.net> wrote in message news:v7a5v1tq05aetkvpaaj02kei7j61hndgd4@4ax.com... > On Sun, 12 Feb 2006 21:12:32 -0600, "twfsa" <twfuksa@qwest.net> wrote: > >>I think I'll call the dealer and see what they have to say, or else it >>will >>have to wait till the dealer does the first oil change and can look at it, >>I >>think its the nature of the beast myself, if it did it all the time from >>every stop then I would be concerned. >> >>Tom >> >> >>"Art" <begunaNOSPAMPLEASE@mindspring.com> wrote in message >>news qPHf.10434$Nv2.7771@newsread1.news.atl.ear thlink.net...>>> Probably anti lock brakes waking up. Probably normal. >>> >>> >>> "twfsa" <twfuksa@qwest.net> wrote in message >>> news:mlvHf.48158$bF.6705@dukeread07... >>>> My mom has a 2006 CR-V automatic trans, when you start the engine put >>>> it >>>> into drive and move foward about 50 ft you hear a clanking noise from >>>> the >>>> front, it will only make this noise when the engine has been shut off, >>>> re-started and put in drive. >>>> >>>> After you hear the clanking noise you will not hear it again driveing >>>> in >>>> town until you shut it off and re-start the engine. >>>> >>>> Thanks >>>> Tom > > > It's called pad shift. the brake pads are shifting in the caliper > mount. It's normal. don't bother asking the dealer. > Chip >
|
|
15 Feb 2006, 08:02 am
|
|||
|
|||
|
Re: CRV 2006 help
If it's like the 2005, it is the reverse lockout solenoid triggering.
twfsa wrote: >>>>>My mom has a 2006 CR-V automatic trans, when you start the engine put >>>>>it >>>>>into drive and move foward about 50 ft you hear a clanking noise from >>>>>the >>>>>front, it will only make this noise when the engine has been shut off, >>>>>re-started and put in drive. >>>>> >>>>>After you hear the clanking noise you will not hear it again driveing >>>>>in >>>>>town until you shut it off and re-start the engine. >>>>> >>>>>Thanks >>>>>Tom
|
|
15 Feb 2006, 07:18 pm
|
|||
|
|||
|
Re: CRV 2006 help
That makes sense do you know what the reverse lock out solonoid does? My
guess is it does not allow the vehicle to be put into reverse when moving foward. Tom "RWM" <RWM@RWMann.com> wrote in message news:43F3265A.6040908@RWMann.com... > If it's like the 2005, it is the reverse lockout solenoid triggering. > > > > twfsa wrote: > > >>>>>>My mom has a 2006 CR-V automatic trans, when you start the engine put >>>>>>it >>>>>>into drive and move foward about 50 ft you hear a clanking noise from >>>>>>the >>>>>>front, it will only make this noise when the engine has been shut off, >>>>>>re-started and put in drive. >>>>>> >>>>>>After you hear the clanking noise you will not hear it again driveing >>>>>>in >>>>>>town until you shut it off and re-start the engine. >>>>>> >>>>>>Thanks >>>>>>Tom
|
|
15 Feb 2006, 10:00 pm
|
|||
|
|||
|
Re: CRV 2006 help
That is the design intent, yes.
twfsa wrote: > That makes sense do you know what the reverse lock out solonoid does? My > guess is it does not allow the vehicle to be put into reverse when moving > foward. > > Tom > > > "RWM" <RWM@RWMann.com> wrote in message news:43F3265A.6040908@RWMann.com... > >>If it's like the 2005, it is the reverse lockout solenoid triggering. >> >> >> >>twfsa wrote: >> >> >> >>>>>>>My mom has a 2006 CR-V automatic trans, when you start the engine put >>>>>>>it >>>>>>>into drive and move foward about 50 ft you hear a clanking noise from >>>>>>>the >>>>>>>front, it will only make this noise when the engine has been shut off, >>>>>>>re-started and put in drive. >>>>>>> >>>>>>>After you hear the clanking noise you will not hear it again driveing >>>>>>>in >>>>>>>town until you shut it off and re-start the engine. >>>>>>> >>>>>>>Thanks >>>>>>>Tom
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Carsoft, BMW ETK V10.0 2006, MITCHELL1 ONDEMAND5 4 QTR 2006 ESTIMATOR, MITCHELL GLASSMATE V5.2, Winworks Autoshop, AUTOMOTIVE EXPERT, Alldata ServiceCenter v2006, 1 DVD, Mitchell [ 57 CDs ], years 2006 - 1983, Alldata 2006, [4 DVDs], [53 CDs], BMW, M | ola@mail.gr | Honda 3 | 1 | 13 Apr 2007 06:57 pm |
| GPS for 2006 CR-V | Andy Dufresne | Honda 2 | 4 | 23 Mar 2006 09:50 am |
| 2006 TL | Greg Schoolden | Acura | 0 | 18 Dec 2005 07:09 am |
| 2006 EL | Humma Kavula | Acura | 11 | 25 Oct 2005 10:12 pm |
| 2006 RSX | Joe | Acura | 6 | 16 Sep 2005 10:19 am |
Linear Mode
