Honda Car Forum


 

Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Honda Acura > Honda 2

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 11 Aug 2005, 02:08 pm
MAT
Guest
 
Posts: n/a
Default Swapping out brake bleeder screws

Hi All,

I finally got speedbleeders for my Si of which I plan on installing with
fresh brake fluid this weekend. My question is can I replace each screw and
bleed it one corner at a time in one step or do I need to replace all 4
bleed screws and go back and bleed them again. I'm wondering if totally
removing/replacing the 2nd screw in a single L/R channel blows the bleed for
the 1st in the same channel. Hopefully this makes sense. Thanks!



Reply With Quote
  #2 (permalink)  
Old 11 Aug 2005, 04:42 pm
twfsa
Guest
 
Posts: n/a
Default Re: Swapping out brake bleeder screws

Fill the master cylinder, start at the wheel furthest from the master
cylinder, replace bleeders one at a time, then go back and bleed furthest
from the master cylinder, working your way to the master cylinder,keeping an
eye on the fluid level, this is how I would do it.

Tom


"MAT" <marcoat*RM_@SPAM_*hotmail.com> wrote in message
news:2ZWdnRkFaMyLP2bfRVn-rw@comcast.com...
> Hi All,
>
> I finally got speedbleeders for my Si of which I plan on installing with
> fresh brake fluid this weekend. My question is can I replace each screw
> and bleed it one corner at a time in one step or do I need to replace all
> 4 bleed screws and go back and bleed them again. I'm wondering if totally
> removing/replacing the 2nd screw in a single L/R channel blows the bleed
> for the 1st in the same channel. Hopefully this makes sense. Thanks!
>
>
>



Reply With Quote
  #3 (permalink)  
Old 11 Aug 2005, 08:03 pm
Bruce
Guest
 
Posts: n/a
Default Re: Swapping out brake bleeder screws

right on...

I concur.

Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Brake Flush Bleeder Bolt Adapters? Elle Honda 2 21 21 Jun 2006 07:58 pm
Swapping out brake bleeder screws MAT Honda 3 2 11 Aug 2005 08:03 pm
motor swapping miyan8r Acura 1 25 May 2005 09:28 am
Screwed up my bleeder bolt---HELP! User38221 Honda 3 5 17 May 2004 11:51 pm


All times are GMT -5. The time now is 08:52 am.


Attribution:
Honda News | Autoblog
Powered by Yahoo Answers




Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
HondaCarForum.com is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse HondaCarForum.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.