Honda Car Forum

Have a Honda Accord V6 2001. Engine makes a rattle sound when you
accelerate to around 30 mph, as you go faster it goes away. Most noticable
when going up hill and pressing the gas, it does not make a noise when
coasting. Any ideas on what this could be?

I have a CRV 4 cyl 2001 doing just about the same thing. It happens
at 2300rpm and sounds like it is coming from beneath the car. A loud
rattling at 30, and 55mph when the engine rpm is 2300. Honda dealer
hears it and cannot locate the source. It's very annoying. If your
mechanic finds it please let me know.
Thanks
Rick


On Mon, 27 Jun 2005 17:54:42 -0700, "Al Franz"
<albert@nospam.netmation.com> wrote:

>Have a Honda Accord V6 2001. Engine makes a rattle sound when you
>accelerate to around 30 mph, as you go faster it goes away. Most noticable
>when going up hill and pressing the gas, it does not make a noise when
>coasting. Any ideas on what this could be?
>
>
>

Al Franz wrote:
> Have a Honda Accord V6 2001. Engine makes a rattle sound when you
> accelerate to around 30 mph, as you go faster it goes away. Most noticable
> when going up hill and pressing the gas, it does not make a noise when
> coasting. Any ideas on what this could be?

Sounds exactly like knocking or pre-ignition, AKA pinging.

Simplest fix may be higher octane fuel.

RickaTTic <rmerkel@verizon.net> wrote in
news:n2a1c1ljv645605lj8o6lrnbcj6pr8r63c@4ax.com:

> I have a CRV 4 cyl 2001 doing just about the same thing. It happens
> at 2300rpm and sounds like it is coming from beneath the car. A loud
> rattling at 30, and 55mph when the engine rpm is 2300. Honda dealer
> hears it and cannot locate the source. It's very annoying. If your
> mechanic finds it please let me know.
> Thanks
> Rick
>


Either loose(cracked or rusted) heat shields or a cracked A-pipe
weld(IIRC,it's a double walled pipe,the inner weld,of course),the pipe from
the header to the catalytic converter.Some of the heat shields can be
unbolted and removed.(just don't park in tall grass;fire hazard)

--
Jim Yanik
jyanik
at
kua.net

Brian Stell <bstell@ix.netcom.com> wrote in
news:uD4we.509$j04.14@newssvr21.news.prodigy.com:

> Al Franz wrote:
>> Have a Honda Accord V6 2001. Engine makes a rattle sound when you
>> accelerate to around 30 mph, as you go faster it goes away. Most
>> noticable when going up hill and pressing the gas, it does not make a
>> noise when coasting. Any ideas on what this could be?
>
> Sounds exactly like knocking or pre-ignition, AKA pinging.
>
> Simplest fix may be higher octane fuel.
>

If he's using the correct octane,he may have a ignition timing
problem,advanced or retarded.

Or a loose heat shield.

--
Jim Yanik
jyanik
at
kua.net

>>>Have a Honda Accord V6 2001. Engine makes a rattle sound when you
>>>accelerate to around 30 mph, as you go faster it goes away. Most
>>>noticable when going up hill and pressing the gas, it does not make a
>>>noise when coasting. Any ideas on what this could be?
....
> Or a loose heat shield.

Yes, it could be a sympathetic vibration rattle but
there are several things here that make it sound more
like pinging than a vibrating part:

The noise appears "when you accelerate to 30" as
opposed to "at ... mph when the engine rpm is ...".

and

"Most noticable when going up hill and pressing the gas".

I'm not sure about the 6th gen accord but I know 7th gen
has a knock sensor. Supposedly, when there is pinging it
detects it and the engine control system should retard the
ignition (but my 2005 v6 pings under similar conditions).