Honda Car Forum

I have difficulty seeing out the back of the TL so I bought a VR3
Back-up camera system. The camera is mounted on the license frame. A
wire needs to pass into the car. I can drill a hole near the license
lights.

To reach the wire I need to remove the liner on the inside of the trunk
lid. Any ideas on how to do this without damaging it?

Thanks
Ed Tee

On Thu, 06 Jul 2006 22:34:01 -0700, ejtee67 wrote:
> To reach the wire I need to remove the liner on the inside of the trunk
> lid. Any ideas on how to do this without damaging it?
>
> Thanks
> Ed Tee

the liner is fastened in with those plastic "push-in clips" right ?
if so, I pulled them out with a thin, small wrench-like thing.
yes, the clips will be damaged, they're not meant to be reused.

Ed,

acurazine.com web site has lots of info for your 3rd generation TL.

Try this link for a search of "camera system" on the site. You need
to be a member to post and search but not to browse. If the specific
search link below doesn't work for you I've included some interesting
backup camera links.
http://tl.acurazine.com/forums/searc...earchid=330163


http://tl.acurazine.com/forums/showt...=camera+system
http://tl.acurazine.com/forums/showt...=camera+system
http://tl.acurazine.com/forums/showt...=camera+system


Good luck with your install.




On 6 Jul 2006 22:34:01 -0700, ejtee67@yahoo.com wrote:

>I have difficulty seeing out the back of the TL so I bought a VR3
>Back-up camera system. The camera is mounted on the license frame. A
>wire needs to pass into the car. I can drill a hole near the license
>lights.
>
>To reach the wire I need to remove the liner on the inside of the trunk
>lid. Any ideas on how to do this without damaging it?
>
>Thanks
>Ed Tee