Honda Car Forum

My washer fluid level indicator light is constantly "ON" even when
full of fluid. I have an Acura 1.7EL. The fluid container is almost
inaccessible from the top. Any suggestions please ? I don't mind
even to disconnect the indicator sensor, but I do't know where that
could be done.
Please help.

Nobody can help on this one ????????????

On Tue, 20 Sep 2005 21:58:27 -0400, malamilia@@hotmail.com wrote:

>My washer fluid level indicator light is constantly "ON" even when
>full of fluid. I have an Acura 1.7EL. The fluid container is almost
>inaccessible from the top. Any suggestions please ? I don't mind
>even to disconnect the indicator sensor, but I do't know where that
>could be done.
>Please help.

malamilia@hotmail.com wrote in
news:4kjbk1hbg9fimlldqn8a34kklkjnk0ikb2@4ax.com:

>
> On Tue, 20 Sep 2005 21:58:27 -0400, malamilia@@hotmail.com wrote:
>
>>My washer fluid level indicator light is constantly "ON" even when
>>full of fluid. I have an Acura 1.7EL. The fluid container is almost
>>inaccessible from the top. Any suggestions please ? I don't mind
>>even to disconnect the indicator sensor, but I do't know where that
>>could be done.
>>Please help.
>
>
> Nobody can help on this one ????????????
>
>


Step 1: Remove front bumper (it's easier than you think). But you may not
actually have to do this...

You may be able to undo the car's undertray splash shield, or the inner
fender liner. If you can, the switch's plug is inboard of the fluid bottle,
towards the front of the car. Reach in and unplug it. It's the only
electrical connection to the bottle.

--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Thanks. I'll give it a go. Regards.

On 7 Oct 2005 01:41:39 GMT, "TeGGeR®" <tegger@tegger.c0m> wrote:

>malamilia@hotmail.com wrote in
>news:4kjbk1hbg9fimlldqn8a34kklkjnk0ikb2@4ax.com :
>
>>
>> On Tue, 20 Sep 2005 21:58:27 -0400, malamilia@@hotmail.com wrote:
>>
>>>My washer fluid level indicator light is constantly "ON" even when
>>>full of fluid. I have an Acura 1.7EL. The fluid container is almost
>>>inaccessible from the top. Any suggestions please ? I don't mind
>>>even to disconnect the indicator sensor, but I do't know where that
>>>could be done.
>>>Please help.
>>
>>
>> Nobody can help on this one ????????????
>>
>>
>
>
>Step 1: Remove front bumper (it's easier than you think). But you may not
>actually have to do this...
>
>You may be able to undo the car's undertray splash shield, or the inner
>fender liner. If you can, the switch's plug is inboard of the fluid bottle,
>towards the front of the car. Reach in and unplug it. It's the only
>electrical connection to the bottle.