Honda Car Forum

After a couple of front end accidents and sheet metal repairs, I believe my
'93 integra needs what used to be called a "frame-pull"..the tires wear out
almost immediately on the inside edges...it feels as though this is the only
part of the tire actually solidly on the ground...the half-shafts also wear
out almost as fast...

I have an acquaintance who knows how, and has the equipment, but needs to
know the dimensions that he is aiming for...the information which used to be
found in a "frame book"

Any advice...

Where could I find these specs...? I don't even know what they are called
nowadays...Would the OEM service manual or "body repair manual" help? Which?

Any other ideas as to what the problem may be...?

I'd appreciate any advice...
I've become rather attached to this car...

Thanks in advance...it means a lot to me...

kenny


--

On Mon, 14 Jun 2004 03:16:17 -0400, Kenny HM Smith
<ustramp@shentel.net> wrote:

>Where could I find these specs...? I don't even know what they are called
>nowadays...Would the OEM service manual or "body repair manual" help? Which?

The Integra Service Manual has a Frame Repair Chart in the Bodywork
section that gives all sorts of dimensions right down to the
centimeter or 1/10 inch