Honda Car Forum


 

Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Honda Acura > Acura

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 07 Nov 2012, 02:40 pm
T.H
Guest
 
Posts: n/a
Default ABS queried per Tegger advice, next steps

Per advice, I shorted the connector to reveal DTC codes for ailing ABS.

Symptom is after starting and beginning to move forward, ABS will light
after 30 feet or so of forward motion. ABS light illuminates and
extinguishes as expected when starting auto.

1994 Integra GS-R VTEC approx 75K miles original owner.

DTC was 4 short flashes and then 8 short flashes.

My interpretation was LR wheel ABS sensor.

I removed wheel, ABS encoder, and cleaned same. No evidence of damage
to "gear" that the magnetic encoder senses to provide pulses. No
evidence to road-induced damage to conductor wires as far as I inspected.

I also removed the other three wheels and performed similar cleaning.

Same symptom.

But, I do now identify the buzzing under the hood as the ABS unit
pressurizing, and running for several seconds and even occasionally
while I am driving and stopped in-traffic. That suggests perhaps the
O-ring failure, but help me perform a wise differential-diagnosis.

Questions thus far:

1. So, after servicing was it necessary to remove the ABS fuse/relay to
clear the DTC stored error codes?

2. Can one remove the ABS Sensor/Encoder ground lug attached to caliper
assembly and insert DVM to check for pulses (continuity) when magnet
activates micro switch?

3. I am using the downloaded PDF from Honda-Tech and referring to page
770 noting the 48 code. Is it possible to check continuity at the ABS
Unit electrical input for continuity from the sensor through cable to
the ABS end? Checking, of course the conductor independent of proper
sensor function. What are these steps and is there a ready web link how-to?

4. My reading (only, so far) suggests the ABS may need some additional
brake fluid. Where does this rank in difficulty/chance of remedy in the
overall process of troubleshooting? Same web link request as in (3), above.

5. Last, for now, what may I have over;looked?

Thanks for any and all comments and suggestions. I am cash poor but
that situation in unlikely to improve anytime soon. But I am an EE and
have always worked on my own autos to my limit of taking my engine apart
and modding [it].

Mike
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
TEGGER??? Need advice/help on cd install Maxima Acura 3 18 Feb 2011 07:35 pm
Five Steps to keep your car looking its best tomn Honda 2 1 05 Apr 2006 07:23 am
TeGGeR's appraisal: TeGGeR makes a boo-boo TeGGeR® Acura 7 06 Jul 2005 10:54 pm
TeGGeR's appraisal: TeGGeR makes a boo-boo TeGGeR® Honda 2 7 06 Jul 2005 10:54 pm
TeGGeR's appraisal: TeGGeR makes a boo-boo TeGGeR® Honda 3 7 06 Jul 2005 10:54 pm


All times are GMT -5. The time now is 07:08 pm.


Attribution:
Honda News | Autoblog
Powered by Yahoo Answers




Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
HondaCarForum.com is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse HondaCarForum.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.