Honda Car Forum

and how to take it off without damaging it

The power steering pump is located on the drivers side of the motor at the top, next to the header.If you're just removing the pump to replace it, loosen the bracket bolts (dont take them out yet) and take the belt off, then unbolt it from the power steering lines, there are 2 of them, and use a rag of some sort to cover the area so the remaining fluid wont cover the engine bay, then unbolt it from the bracket and take it off, installation is reverse of removal If you're removing the ENTIRE SYSTEM, you need to take that pump off as said, then you need a line wrench to get the ps feed hose off of the ps rack, then remove the power steering cooler in front of the radiator, and the reservoir, and just let the rack remain open and turn the wheel a few times back and forth to get all the fluid out. People sometimes cap off the rack or loop the lines, but it's not something you NEED to do.